您要查找的是不是：
- TiO_2 nano thin film was prepared on ITO glass substrate by dip coating and spin coating process. 以TiCl_4和C_(16)H_(36)O_4Ti溶胶为前驱体,分别采用旋转-涂覆法和浸渍-提拉法制备了纳米TiO_2薄膜。
- The TiO_2 nano thin film prepared by spin coating process is white, while the TiO_2 nano thin film made by dip coating process is colorless and transparent. 以TICl_4为通过旋转.;涂覆法制备的纳米TiO_2薄膜;表观为白色不透明膜;而以C_(16)H_(36)O_4Ti为前驱体选用浸渍-提拉法制备的薄膜为无色透明膜。
- ZnO film got by spin coating as the electron transport layer, MEH-PPV as the hole transport layer, a new structure of electroluminescence device was fabricated. 并且对此结构的双层器件进行了不同颗粒尺寸的ZnO纳米颗粒薄膜的对比研究。;
- Outstanding adhesion to coating film and steel surface. 对漆膜及钢铁表面具有极好的附着力。
- Repair, seam filling and coating film materials for wall. 修补、填缝、不垂流壁材涂覆保护膜。
- The spin coating is followed by a baking step to remove the solvent and, in some cases, to complete the polymerization. 接著以烘烤除去溶剂，有时候可以顺便完成聚合反应。
- We prepared two kinds of OLED devices by spin coating, which have three-layer structures[a:ITO/MEH-PPV/Al] and [b: ITO/MEH-PPV/Ca:Al]. 我们利用MEH-PPV为发光材料制备了两种结构电致发光器件:a.;ITO/MEH-PPV/Al和b
- The chemical is widely used in the production of LSI,VLSI and other semiconductors to remove photoresist edge bead that occurs during typical spin coat wafer processing. 该试剂用于清除匀胶后残留于硅片边缘及背面的光刻胶，已经广泛应用于中、大规模集成电路及其它半导体器件的生产。
- HM CC-H series High-efficiency Candy Coating Machine can not only coat sugar, but also coat film. 系列高效糖果包衣机，不仅包糖衣，还可包膜衣；
- The fineness of fly ash influences on the solidifying velocity and coating film performance of polyurethane waterproof coating. 粉煤灰的细度对防水涂料的固化速度和涂膜性能都有影响。
- The effects of the composition and molecular weight of the HDI oligomer on the properties of coating film were studied. 通过改变HDI齐聚物合成反应的条件，探讨了齐聚物的组成和分子量对涂膜性能的影响。
- Coating film waterproof, oil-proof, dustproof and lightproof, candy be not intenerated, slimy or changed shape. 包上膜衣，可防水、防油、防尘、遮光，糖果不受潮、不粘连、不变形。
- Use special emulsifier, its appearance is halfway transparent, and the sheen of coating film is high. 选用特殊的乳化剂，外观呈半透明，涂膜光泽度高。
- In this thesis, a simple and effective slurry spin coating approach (as a patent applied by us) was developed for fabricating Sm0.2Ce0.8O1.9 (SDC) films for anode-supported solid oxide fuel cells. 本论文应用我们发明的简单;高效的浆料旋涂制膜方法;制备阳极支撑的固体氧化物燃料电池Sm0.;2Ce0
- The results were discussed from the principle of electrolytic coating film and light etching effect. 并用电解复膜原理和光蚀效应对研究结果进行了讨论。
- In this thesis, we provide a new .fabrication: using nanoparticles to fabricate erbium doped luminescence thin film.We mix nanoparticles and use spin coating process to deposit it on a silicon wafer. 这篇论文提出新的制程方法：使用奈米粒子制作掺铒发光薄膜，利用奈米粒子混合旋布玻璃并旋涂于矽基板上。
- Takashi O., Luis B.M., Ferry I., Kikuo O.,“Fabrication of a large area monolayer of silica particles on a sapphire substrate by a spin coating method”, Colloids and Surfaces A, Physicochem.Eng. 王惠君，“以回应曲面法探讨溶胶-凝胶法制备奈米二氧化矽之参数影响”，中原大学化学工程学系，2004。
- The results indicate that the samples which is one step pretreated has the best adhesion and the thinnest mesosphere between the coating film and magnesium substrate. 结果表明，采用一步法前处理工艺的试样，镀层与基体之间具有良好的结合力，金相显微观察发现镀层与基体之间具有最薄的中间过渡层。
- The films of bisphenol A dicinnamic ester spin coated on plastic substrates occurs crosslinking reaction after exposed to linearly polarized ultraviolet light. 肉桂酸双酚A双酯旋涂于塑料基板,在线偏振紫外光作用下,发生光交联反应,诱导液晶定向排列,整个取向过程不需要对基板进行热处理。
- The coating film has predominant performance of hardness, glossiness, buildiness, waterresistance and abrasion resistance, especially yellowness resistance and high glossines. 该产品具有非常优异的耐黄变性和非常高的光泽度。
