您要查找的是不是:
- speed adjustable screw feeder 可调速螺旋给料机
- engine idling speed adjusting screw 发动机怠速调整螺丝
- Grinding speed adjustable and wider grinding scope. 研磨速度可调,适用范围更广泛。
- An energy reduction method for screw feeder of defibrator was described based or related theory. 依据理论得出螺旋进料器降能的方法,该方法可用于热磨机的改造之中,实践证明这种方法是可行的。
- Independent rubber about rate schedule and speed adjust. 独立的胶头上下行程和速度调节。
- Standard Units: A3- chamber system including Screw Feeder, Heater, Agitator, Water Apparatus, Level Switch,, Control Panel, Wetting Device, etc. 标准机构:全自动三槽式,附有粉体进料机,加热器,搅拌机,给水设备,液位开关,控制箱及湿润装置等。
- Remove adjuster lever, adjuster screw and spring. 拆卸调整器杆,调整器螺丝和弹簧。
- Add fine adjust device for the pressure of foot,without dial on the adjustable screw, more convenience for operation. 压脚压力采用微调装置,压力调节螺钉设有刻度,更加方便操作。
- Based on analysis of the slipping phenomenon of chips in screw feeder of defibrator, measures to prevent theproblem are described. 根据螺旋进料器发生物料打滑的原因,提出消除打滑的方法。
- The high step moves from under the adjusting screw. 使高点从调节螺钉下移动。
- J. Vertical Shaft Fine Adjustment Screw. 垂直杆微调螺丝.
- The regulating handle is fitted with a fine speed adjust knob and a latch. 调节手柄配有一个细的速度调整旋扭一个锁销。
- Loosen the adjustment screw, and adjust the length of the link rod. 请拧松调整螺丝,拔出或插入连接杆进行调整。
- The device constructed a hopper, as a buffer tank, a screw feeder, a weighing-cell, a fill plate, a motor drive, and a load-cell based weighing controller. 主要的构件有进料漏斗、螺旋送料器、荷重元、盛料斗、驱动马达及重量指示器等。
- Now the AC invertersare widely used in the cement industry, for the innovation of the roots bowler, discfeeder, screw feeder, disintegrator, ventilation fan and so on. 主要是立窑的罗茨鼓风机、园盘给料机,予加水成球,螺旋输送机、粉碎机、破碎机、皮带输送机,以及排风扇等。
- Speed adjustment:5 kinds of speed. 调速功能:有5种速度。
- The adjusting screw rests on the high step of the cam. 调节螺钉落在凸轮高点上。
- Final foleing transportation belt with left and right side speed adjustable individually for correcting box blank for straight travelling. 本折部左右输送皮带速度可单独调节,以校正盒坯行走方向确保直线输送。
- Tighten adjustment screw to 3 N·m (30 in-lbs) torque. 拧紧调整螺丝到3 N·m (30 in-lbs)扭力。
- To Readjust- Loosen lock nut on the adjusting screw. 重新调节:松开调节螺丝上的锁定螺母。