您要查找的是不是:
- HT Sub-factory : complete process of annealing, quenching, tempering, quenching and tempering, solution treatment etc. 热处理厂:可完成退火;正火;回火,调质;固溶处理等工艺.
- Adding elements of Zr and Cr can increase the tensile strength, and electric conduction can be improved by solution treatment. 同时,铬和锆的存在可提高合金的抗拉强度;采用固溶处理使合金具有高导电性能。
- Intermetallic compound foam reinforced aluminium alloy surface composite layer are obtained by solution treatment after low pressure Casting. 通过低压铸造后固溶处理的方法,获得了网状金属间化合物增强铝合金表面复合层。
- During the fast cooling process of solution treatment, nonequilibrium segregation of manganese was produced at austenite grain boundaries. 在固溶处理时快速冷却过程中锰在奥氏体晶界产生不平衡偏聚。
- After the homemade welding building of the lead liquid pool of austenitic stainless steel,solution treatment is demanded. 奥氏体不锈钢铅液池进行国产化制作,要求焊接后进行固溶处理,固溶处理后经探伤发现焊缝上有大量的裂纹。
- The -phases almost all soluble in -Mg after solution treatment and the mechanical properties improve slightly while the grain size tends to coarsening. 合金经固溶处理后 相几乎完全溶于 -Mg固溶体,但晶粒尺寸有粗化倾向,合金的力学性能略有提高。
- After the solution treatment(20h),the Mg_(17)Al_(12) phase is almost dissolved,but the black particle quasicrystal phase is not dissolved and retained stability. 固溶处理(28 h)后,Mg17A l12相基本溶解,黑色的颗粒状准晶相在固溶处理过程中保持稳定而未溶解。 固溶处理对合金的硬度影响不太明显。
- The high temperature near-solvus pre-precipitation following higher temperature solution treatment were performed on LC52 and Quansi 7039 aluminum alloy. 研究了高温固溶后降温处理工艺对中强可使预析出LC52和7039铝合金的组织、时效硬化和应力腐蚀的影响。
- The possibility of manufacturing 2205 duplex stainless steel (DSS) by accelerated cooling control (ACC) process without solution treatment was investigated in this paper. 摘要本文探讨以加速冷却制程生产2205不锈钢而省略固溶化处理之可行性。
- Flow injection technique is a solution treatment technique under nonhomogeneous and unbalanced condition and has gained wide application in food analysis . 流动注射是一种非均匀非平衡状态下的溶液处理技术,在食品分析领域中的应用日益广泛。
- Effects of master alloy of quasicrystal containing magnesium additions and solution treatment on microstructure and mechanical properties of AZ91 magnesium alloy were studied. 研究了镁基准晶中间合金和固溶处理工艺对AZ91合金显微组织和力学性能的影响。
- Effects of solution treatment on the microstructure and martensitic transformation start temperature Ms of Ni47 Ti44 Nb9 shape memory alloy have been investigated by means of SEM and differential scanning calorimeter (DSC). 本文用扫描电镜和差示扫描量热仪 (DSC)研究了固溶热处理对Ni47Ti44Nb9记忆合金显微组织和马氏体相变开始温度Ms点的影响。
- Effects of solution treatment parameters on microstructures, tensile properties and fractography of Al-9.8Zn-2.37Mg-2.22Cu0.12Zr alloy were studied by tensile testing, optical microscopy, SEM and EDS. 采用拉伸力学性能测试、金相观察、SEM和EDS等方法研究了固溶温度与时间对Al-9.;8Zn-2
- The results show that in the condition of water cooling rate after 1373K solution treatment, fracture surfaces of the AIM steel exhibit a IGB character, and that is restricted by ESR. 结果表明:在1373K固溶水冷条件下,AIM钢存在低温沿晶脆性,电渣重熔对其具有抑制作用。
- The effects of different solution treatments on the microstructure and grain size of GH128 Superalloy were studied. 研究了不同固溶处理对GH128高温合金晶粒度和显微组织的影响。
- But addition of 0.15% Sc can not restrain recrystallization in the process of solid solution treatment,and addition 0.25% Sc can increase recrystallization in the process of solid solution treatment,reduce the strength of the alloy. 添加0.;15%25Sc和0
- By means of electron probe microanalyzer (EPMA) and transmission electron microscope (TEM),the effect of solution treatment with electric field on the microstructure of 2091 Al Li alloy is investigated. 用电子探针及透射电镜研究了2091Al?Li合金的电场固溶对显微结构的影响。
- It may take a long time to find a solution to the problem. 也许要花很长时间才能找到解决这个问题的办法。
- The result showed that copper was distributed inharmoniously in the supersaturation ferrite after solution treatment, in which a large number of namostructure ordering domain was distributed. 这种过饱和铁素体基体上分布着大量纳米级的有序畴结构。
- I simply refuse to conceive of such a solution. 这样的解决办法,我是绝对不考虑的。