您要查找的是不是:
- As examples, the oil temperature change and solidifying process were calculated by this method, and satisfactory results have been obtained. 采用保角变换和盒式积分法对数学模型进行了处理,并构造出问题的差分方程。
- All kinds of disfigurements, such as shrinkage, porosity and distortions and so on, come into being in the solidifying process or relate closely to it. 如何通过科学计算和形象描绘,优化最佳方案并形成工艺文件,尽可能以较少的人力物力生产出优质铸件,是铸造凝固过程数值模拟的主要任务。
- Cast filling and solidifying process are simulated with INTECAST, cast numerical simulation software so that design of casting process is optimized. 通过应用INTECAST铸造数值模拟软件对充型和凝固过程的模拟仿真,实现了铸造工艺的优化设计。
- Chromium residue was treated by solidification process with cement. 采用水泥固化的方法对铬渣进行处理。
- Pressed Solidification Process Equation of Compatibility. 加压凝固过程的谐调方程。
- The results demonstrate that solidification process may be divided into two stages: quasi-state stage and accelerating stage. 结果表明其凝固过程分为凝固准稳态阶段和凝固加速阶段两个阶段。
- Adding nucleating agents to metal liquid is a common way to improve the structure and mechanical properties in solidification process. 摘要金属凝固过程中加入形核剂是改善金属材料组织和性能的常用方法。
- The effect of power ultrasonic on the solidification process of Babbit was investigated. 研究了功率超声对巴氏合金凝固过程的影响。
- The solidification process of liquid metal in the CASTEX technique was studied by FEM(finite element method). 利用有限元法研究了连续铸挤工艺中液态金属的动态凝固过程。
- Magnetic field simulation of induction heating in glass-coated copper microwire rapid solidification process[J]. 引用该论文 周秀文;蔡红梅;张继成;刘德斌;孙祚科;余斌.
- Abstract: The solidification process of liquid metal in the CASTEX technique was studied by FEM(finite element method). 摘 要: 利用有限元法研究了连续铸挤工艺中液态金属的动态凝固过程。
- And the microcomputer system has beensuccessfully used in the investigation of DD3 SC superalloy solidification process. 并将该微机系统成功地用于DD3单晶高温合金凝固过程的研究。
- The solidification process takes 24 hours to complete and any surplus material supports the structure during manufacture and can be reused. 凝固过程需要24小时才能完成,任何剩余物质支持制造过程中的结构和可重复使用。
- A new solidification process using AASC (alkali-activated slag cement) to immobilize HLW (high level waste) is introduced in the article. 介绍了用碱矿渣水泥固化高放废液新工艺。
- Abstract: In this paper, solidification process of laser pool for compositecoating system is studied, using numerical technology. 文摘:采用数值模拟技术研究了复合涂层激光熔池凝固过程。
- The key factors to produce post molten region are the overheating and the lat ent heat released during solidification process in upper molten pool. 影响后熔的主要因素是熔覆层和过渡区凝固过程中释放的潜热和熔覆层的过热。
- Surplus sand that has not been embedded within the structure acts as a buttressing support while the solidification process takes place. 剩余砂尚未嵌入结构作为支撑的支持,而凝固过程发生。
- The effect of power ultrasound on solidification process of high temperature aluminum melt was investigated under some parameters. 研究了在一定超声参数条件下,功率超声对高温铝熔体凝固过程的影响。
- Rappaz M,Gandin Ch A.Probabilistic Modelling of Microstruc Ture Formation in Solidification Process[J].Acta Mater,1989,34(3):345-360. 李殿中;杜强;李依依.;枝晶凝固过程中的溶质浓度分布模拟[J]
- The dominant mechanism of electric pulse exerted upon the metal solidification process is inducted and analysed in theory. 从理论上归纳和分析了脉冲电流在金属凝固过程中产生作用的主要机制。