您要查找的是不是:
- Chromium residue was treated by solidification process with cement. 采用水泥固化的方法对铬渣进行处理。
- Pressed Solidification Process Equation of Compatibility. 加压凝固过程的谐调方程。
- The results demonstrate that solidification process may be divided into two stages: quasi-state stage and accelerating stage. 结果表明其凝固过程分为凝固准稳态阶段和凝固加速阶段两个阶段。
- Adding nucleating agents to metal liquid is a common way to improve the structure and mechanical properties in solidification process. 摘要金属凝固过程中加入形核剂是改善金属材料组织和性能的常用方法。
- Conventional planar flow casting(PFC)is one of rapid solidification processes for fabrication of microcrystalline or amorphous ribbons. 传统平面流铸技术是用于生产微晶或非晶合金薄带的一种快速凝固技术。
- The effect of power ultrasonic on the solidification process of Babbit was investigated. 研究了功率超声对巴氏合金凝固过程的影响。
- The solidification process of liquid metal in the CASTEX technique was studied by FEM(finite element method). 利用有限元法研究了连续铸挤工艺中液态金属的动态凝固过程。
- Magnetic field simulation of induction heating in glass-coated copper microwire rapid solidification process[J]. 引用该论文 周秀文;蔡红梅;张继成;刘德斌;孙祚科;余斌.
- There are many sorts of flows of melten liquid, it plays an important role in the metal's metallurgy and solidification processes. 液态金属的流动有多种形式,它对金属冶金、凝固过程有着重要影响。
- Finite Difference Method (FDM) is usually used for calculating the temperature field of casting solidification processes. 有限差分方法是凝固过程温度场解析的常用数值计算方法。
- Abstract: The solidification process of liquid metal in the CASTEX technique was studied by FEM(finite element method). 摘 要: 利用有限元法研究了连续铸挤工艺中液态金属的动态凝固过程。
- And the microcomputer system has beensuccessfully used in the investigation of DD3 SC superalloy solidification process. 并将该微机系统成功地用于DD3单晶高温合金凝固过程的研究。
- The solidification process takes 24 hours to complete and any surplus material supports the structure during manufacture and can be reused. 凝固过程需要24小时才能完成,任何剩余物质支持制造过程中的结构和可重复使用。
- The applications show that the software can aid technologists to optimize cast process by forecasting casting defects arising during mold filling and solidification processes. 并给出了华铸CAE软件在特种铸造中的一些应用实例,应用表明该软件能够准确地预测铸件在充型凝固过程中所产生的缺陷,从而辅助工艺人员进行工艺优化,指导实际铸件生产。
- A new solidification process using AASC (alkali-activated slag cement) to immobilize HLW (high level waste) is introduced in the article. 介绍了用碱矿渣水泥固化高放废液新工艺。
- Abstract: In this paper, solidification process of laser pool for compositecoating system is studied, using numerical technology. 文摘:采用数值模拟技术研究了复合涂层激光熔池凝固过程。
- The key factors to produce post molten region are the overheating and the lat ent heat released during solidification process in upper molten pool. 影响后熔的主要因素是熔覆层和过渡区凝固过程中释放的潜热和熔覆层的过热。
- Surplus sand that has not been embedded within the structure acts as a buttressing support while the solidification process takes place. 剩余砂尚未嵌入结构作为支撑的支持,而凝固过程发生。
- The effect of power ultrasound on solidification process of high temperature aluminum melt was investigated under some parameters. 研究了在一定超声参数条件下,功率超声对高温铝熔体凝固过程的影响。
- Rappaz M,Gandin Ch A.Probabilistic Modelling of Microstruc Ture Formation in Solidification Process[J].Acta Mater,1989,34(3):345-360. 李殿中;杜强;李依依.;枝晶凝固过程中的溶质浓度分布模拟[J]