您要查找的是不是:
- A.Ciucci,et al. Numerical Analysis of Ignition Transients in Solid Rocket Motors. 余贞勇,固体火箭发动机翼槽内火焰传播机理研究,西北工业大学博士论文,2000.;3。
- The results show that the model with high precision will find promising engineering application in research of solid rocket motors. 结果表明,该模型精度较高,在固体火箭发动机研究方面具有较好的工程应用价值。
- And a phenoloc resin with high char yield, which can be widely used for heat protection of high pressure solid rocket motors, has been developed. 研究了酚醛树脂配比与酚醛树脂的结构、热降解行为、烧蚀性能之间的关系,研制出了可广泛应用于高压固体火箭发动机热防护的高炭化率酚醛树脂。
- Char, J. M. "Ignition, Flame Spreading, and Combustion of Segmented Solid Rocket Motors, "Transcations of the Aeronautical and Astronautical Society, R.O.C., Vol. 23, Dec, 1990. 游义地、贾泽民、张文政,"管内空穴暂态混合对流之流场分析",第十四届中国力学会议,12月,1990年。
- Four nozzles, canted outboard, split the exhaust of the solid rocket motor into four equal tails. 四个向外倾斜的喷管把固体火箭发动机的排气流分成四个相等的尾巴。
- The influence of structure axial vibration on the internal ballistics of solid rocket motor was investigated. 文中研究了固体发动机结构的轴向振动对燃烧室内弹道性能的影响。
- Investigated charring erosive characters of internal insulation of solid rocket motor under flight acceleration. 研究了固体火箭发动机内绝热层在飞行加速度条件下的炭化烧蚀特性。
- The thrust vector control(TVC) performance test of solid rocket motor is presented in this paper. 本文介绍了固体火箭发动机水下推力矢量特性试验。
- A response surface method(RSM) for structure reliability analysis of solid rocket motor(SRM) grain was presented. 发展了一种固体火箭发动机药柱结构可靠度分析的响应面法。
- Buckling analysis on rear dome of solid rocket motor case was studied by means of ANSYS. 用ANSYS软件对固体发动机壳体后封头进行了外压屈曲分析。
- Crose J G.Reliability of solid rocket motor cases and nozzles[R].NTI S,N93-22103. 王松柏.;固体火箭发动机壳体结构的动态可靠性设计[J]
- Finite element method is used in the study of nozzle damping of instable combustion in a solid rocket motor. 应用有限单元法研究固体火箭发动机不稳定燃烧中的喷管阻尼,并用波衰减对比法进行了试验研究。
- Carbon/carbon composites have become the most ideal materials for nozzles of solid rocket motor (SRM). 摘要C/C复合材料已成为固体火箭发动机(SRM)最理想的喷管材料。
- Based on the concept of Design for Cost (DFC) proposed by NASA, the paper explores the methods to realize DFC from both quantitative and qualitative approaches and applies them into the process of concept design of Solid Rocket Motors. 本文在NASA提出的面向成本设计(DFC)概念的基础上,从定量和定性两条途径探索了实现DFC的方法和手段,并将其应用于固体火箭发动机概念设计过程中。
- With the development of national defense and aerospace industry, detachmentdetection for solid rocket motor is the most pressing issue. 随着国防和航空航天事业的发展,大型固体火箭发动机的脱粘检测成为紧迫问题。
- The mechanism of solid rocket motor laser ignition,composition of practical laser ignition system and its key technologies are summaried. 概述了固体火箭发动机激光点火的机理、实用激光点火系统的组成和主要技术关键。
- The erosive property and principle of copper-infiltrated graphite as solid rocket motor(SRM) throat insert and tailpipe nozzle bushing are presented. 介绍了石墨渗铜材料作为固体火箭发动机(SRM)喉衬与长尾管衬套的烧蚀特性和机理。
- It is an effective new processing way for loading of the solid rocket motor with high loading density, high propellant mass fraction propellant. 为今后高装填密度、高质量比的发动机装药开拓出一条新途径。
- New insight also was offered on Chinese solid rocket motor technology work, important for both missile and space launch applications. 研究还提供了对于导弹和航天发射都具有重要影响的固体火箭发动机技术工作。
- The insulation layer, artificial debond layer and propellant grain in solid rocket motor chamber (SRM) are all polymer composite systems. 固体火箭发动机燃烧室内绝热层、人工脱黏层及推进剂药柱,均为高分子材料复合体系。