您要查找的是不是:
- The magnitude of the small “sawtooth” is linear to the sliding speed. 摩擦力曲线中的小锯齿峰值与滑动速度呈线性关系。
- Adhesive wear is the main abrasion mechanism of composite in high sliding speed and heavy-load. 在低速低载时,复合材料的磨损以犁削磨损为主,在高速高载时,复合材料的磨损以粘着磨损为主;
- The abrasion of the surface of the pangolin’s scale would increase with the size or the relative sliding speed of the particle. 穿山甲鳞片表面的自由式磨料磨损量,随着磨料粒子尺寸或相对滑动速度的提高而增大。
- The tribological behaviors of Al graphite composites under low load and low sliding speed were studied with a Falex machine. 研究了低速、低载荷滑动摩擦条件下铝基石墨复合材料的摩擦学特性.结果表明:在相对滑动初期,复合材料的摩擦系数与基体合金相近;
- The magnitudes of “sawtooth” depend on the load, sliding speed, and the lattice difference across the sliding surface. 大小锯齿的峰值受载荷、滑动速度、接触面两侧的晶格常数及晶格位向差等多个因素的影响。
- The faster the wheel sliding speed is, the shallower TAZ in the vertical direction and the wider TAZ in the lateral direction becomes. 相对滑动速度越大,热影响层深度和宽度分别变浅和变宽;
- The influences of surface modification,sliding speed,load,sliding distance,counterface properties etc.on tribology were reviewed. 分别讨论了不同聚合物基体、不同的填料及固体润滑剂对复合材料摩擦因数及磨损率的影响;
- The content of graphite, load and sliding speed that influenced the dry sliding wear and friction of bronze-graphite thermal spraying coatings were studied. 研究了石墨含量和载荷等对青铜-石墨复合粉末热喷涂自润滑涂层干滑动摩擦磨损性能的影响。
- However, at high sliding speed and large load, the abrasion, adhesion, delamination as well as fatigue wear occur, and the wear resistance of the coati... 重载高速条件下,熔涂层的干摩擦滑动磨损机制比较复杂,存在磨料磨损,粘着磨损,剥层磨损等多种机制,熔涂层的耐磨性是45钢的15倍以上。
- The friction and wear properties of polytetrafluoroethylene(PTFE)reinforced with PTW at different PTW content, temperature, load and sliding speed were investigated. 考察了PTW含量、摩擦温度、载荷和滑行速度对其影响。
- The friction and wear properties of polytetrafluoroethylene (PTFE) reinforced with PTW at different PTW content, temperature, load and sliding speed were investigated. 考察了PTW含量、摩擦温度、载荷和滑行速度对其影响。结果表明,PTW-PTFE的磨损量仅是纯PTFE的1/10;
- At very light normal load and slow sliding speed, the wear mechanism of 2024 aluminum alloy was abrasive wear and delamination wear. At very high normal load and sliding speed, severe melt wear and gross material transfer took place. 2024铝合金在轻微磨损条件下主要是磨粒磨损和剥层磨损,而在高速高载条件下主要是严重熔融磨损,并伴随材料的大量转移。
- The experimental results showed that load, sliding speed and roughness of mating surfaces all played notable impacts on the friction and waer behaviors of PTFE and PTFE/LCP composites. 实验结果表明:负荷、线速度以及偶件的粗糙度等因素对PTFE及其合金的摩擦磨损行为有较大影响;
- Owing to the existence of micro hole in the coating of arc spraying, the excellent property of friction and wear can be obtained,especialy under the condition of a rapider sliding speed. 另外,电弧喷涂涂层中显微孔隙的存在,是使其具有优良摩擦磨损性能的主要原因,尤其在较高的滑动速度下,它的优异性能更加明显。
- The slide cut off the valley from the rest of the world. 山崩切断了这个山谷与外界的联系。
- No horse has a speed comparable to that of his. 没有一匹马的速度能比得上他的马。
- Theory Study on Sliding Speed of Strop Ropeway 滑索的滑速理论研究
- House values may begin to slide. 房价可能开始逐渐下降了。
- I was sliding (about) helplessly (on the ice). 我(在冰上)身不由己地滑起来了。
- That's all there is to make a speed dial call. 在那里全部要进行快速拨号呼叫。