您要查找的是不是:
- It is presented an experimental study on the bond behavior of NSM CFRP strips using a simple shear test set -up. 通过CFRP板条嵌入混凝土试块的界面单剪试验,研究粘结长度对界面粘结性能的影响。
- Simple shear test shows that there is a shear zone in soil nearby the contact surface, in which the shear dilation/compression effect exists during shearing. 接触面单剪试验显示,在土与结构接触界面土体一侧存在剪切错动带,剪切过程中的土尤其是粗颗粒土出现明显的剪胀/剪缩效应。
- Cyclic simple shear tests were numerically modeled to validate the codes and show the performance of the model. 通过对循环单剪试验的模拟验证了程序的可靠性和模型的表现。
- Furthermore,undisturbed samples of each layer soil are taken out,and the maximum dynamic shear modulus is obtained by laboratory cyclic simple shear tests. 此外,取出了场地各层土的原状土样,进行了室内循环单剪试验,获得了各层土的动剪模量,并与剪切波速的计算结果进行了比较分析。
- Large-scale simple shear test on mechanical properties of interface between concrete face and gravel underlayer 砾石垫层-混凝土接触面力学特性单剪试验研究
- simple shearing test 单剪试验
- Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils 粘性土的压密不排水直接样品剪切试验的试验方法
- simple shear test 单剪试验
- This verifies the equivalence of pure shear and simple shear. 这就证明了线剪切与简单剪刀的等价性。
- Experimental Study on Dynamic Shear Modulus and Damping Ratio with Cyclic Simple Shear Tests 动剪模量和阻尼比的循环单剪试验研究
- Standard compaction test and undrained direct shear test were carried out. 实验方式是采取标准压实试验及不排水直接剪力试验。
- Shearing test on 72 cube specimens with cutting groove bonding has been done, and the experiment results are given and have been analyzed. 摘要对72个沟槽式新老混凝土粘结试件进行了抗剪试验,给出了试验结果,并对其进行了分析。
- Variation Rule of Shear Strength Index When Direct Shear Test of Coarse-grained Soil. 粗粒土直接剪切试验抗剪强度指标变化规律。
- A simple test will show if this is real gold. 简单的试验就能证明这是否是真金。
- Finally based on the analyzing of shear test data, classification and development pattern, this paper puts forward an index value of shearing strength. 最后在分析抗剪试验资料和分类及发育规律的基础上,提出了抗剪强度指标的建议值。
- Natural deformational zones are commonly the result of general shear, a combination of pure shear (coaxial contraction or extension) and simple shear. 天然变形带通常是一般剪切作用的产物,是纯剪切(共轴缩短或伸展)和简单剪切的组合。
- Finally use the dynamic three axle shear test to research impulsive load function under red clay mechanics and distortion characteristic. 最后通过动力三轴试验仪研究冲击荷载作用下红粘土的力学和变形特性。
- ECAP (Equal Channel Angular Pressing) is a technique subjecting materials to extensive deformation by simple shear and used to make an ultra-fine grained board and stick. 等通道转角挤压技术(Equal Channel Angular Pressing,简称ECAP),是一种通过简单的剪切原理使材料产生强烈的塑性变形,从而实现制备超细晶块体或棒体材料的有效方法。
- The kinematic vorticity is a measure of the non-coaxiality in progressive deformation history and,therefore,is the ratio of the pure shear to simple shear of a general shear zone. 本文对一般剪切带的概念及其分类进行了描述,对运动学涡度和极摩尔圆的原理及其应用进行了系统的论述,并在此基础上提出了几种新的实用的极摩尔圆编制方法。
- The characteristic values of micro shear test and tensile test of aluminium alloy were determined and the quantitative expression of these characteristic values were studied. 通过测定铝合金微型剪切试验和拉伸试验的性能参数,研究得出了这些性能参数之间的数学关系式。