您要查找的是不是:
- Shot peen forming and laser peen forming,two peen forming technologies,have been used to form sheet metals which have gently shapes. 机械喷丸成形和激光喷丸成形是两种喷丸成形技术,用于成形外形变化平缓的蒙皮类钣金零件。
- Keywords Shot peen forming;Banded shot peen;Wing skin panel; 喷丸成形;条带喷丸;机翼壁板;
- Shot Peen Forming and Laser Peen Forming Technologies of Sheet Metal 金属板料的机械喷丸成形与激光喷丸成形技术
- The application and development of advanced shot peen forming technologies 先进喷丸成形技术及其应用与发展
- Keywords peen forming;shot peen forming;laser peen forming;fatigue life; 喷丸成形;机械喷丸成形;激光喷丸成形;疲劳寿命;
- Numerical Simulation and Optimization For Shot Peening Forming Process of Panel with Stiffeners 板加筋壁板零件的喷丸成形数值模拟与工艺优化
- Numerical Simulation and Parameter Optimization for Shot Peen Forming Process Based on Temperature Gradient 基于温度场的喷丸成形数值模拟及参数优化
- Keywords shot peen forming;integral panel;pre-stress shot peening;numerical shot peening;laser shot peening;ultrasonic shot peening;cavitation shotless peening; 喷丸成形技术;整体壁板;预应力喷丸;数字化喷丸;激光喷丸;超声喷丸;高压水喷丸;
- shot peen forming 喷丸成形
- shot peening forming 喷丸成形
- One of environmental protection of sandblasting, shot peening oriented. 其中以环保型喷砂、喷丸为主。
- And when shot peening treater, the fatigue strength of the chian will improve 12.3%. 经喷丸处理链条疲劳强度可提高12.;3%25。
- The feasibility of improving K417 fatigue life by surface shot peening and recrystallization was studied. 研究了采用喷丸再结晶方法提高K417合金疲劳寿命的可行性。
- The fine structurec hange in the materials after shot peening and extrusion has been investigated by means of TEM. 用透射电镜对超高强度钢中的喷丸利挤压强化层的精细组织进行了研究。
- Laser peening forming is an emerging modern process developed from laser shock strengthening. 激光喷丸塑性成形金属板料是从激光强化发展起来的新技术。
- The results show that shot peening is an effective way to prolong the overall service life of track pans. 研究认为,对中锰铸钢坦克履带板连接筋进行喷丸强化预处理,是提高其整体使用寿命的重要途径。
- Orthogonal optimum design of laser peen forming based on finite element simulation[J]. 引用该论文 曹向广;周建忠;袁国定;杜建钧;倪敏雄.
- The surface layer of shot peening strengthening was analyzed with OM, SEM and TEM. 采用金相显微镜、扫描电镜和透射电镜分析材料喷丸强化层。
- Theoretical Investigation and Finite Element Simulation of Laser Peen Forming of Metal Plate[J]. 引用该论文 周建忠;倪敏雄;张永康;杨超君;杜建钧;曹向广.
- Scoring or shot peening procedure shall be in accordance with the manufacturer's technology. 划痕或喷丸硬化过程要按生产厂家技术进行?