您要查找的是不是：
- shielded carbon arc welding 碳弧保护焊, 气体保护碳极电弧焊
- Multi-characteristic output, is suitable for electric slag welding, submerge arc welding, carbon arc air gouging and manual welding, etc. 多特性输出，可用于电渣焊、埋弧焊、碳弧气刨、手工焊等。
- C. arc welding equipment.It can use a great variety of brands of welding rod to undergo D.C. manual electirc arc welding.In particular, it also can be used as carbon arc air gouging machine. 该焊机是一种新型高效节能直流弧焊电源，适用于各种牌号的焊条进行直流手工电弧焊接，也可作为电弧气刨机使用。
- On Cast- Iron Packing Carbon Arc Welding 铸铁填料碳弧焊
- Such as electric arc welding, carbon dioxide gas shielded arc welding, TIG etc. 如：电弧焊、二氧化碳气体保护焊、氩弧焊等各种焊接。
- Good master of process of argon arc welding, gas shielded arc welding, laser beam welding, etc. 精通氩弧焊、气体保护焊,激光焊等焊接工艺;
- To weld and repair the aircraft landing gear by manual TIG welding instead of shielded metal arc welding(SMAW welding)which is used in air unit now is tentatively discussed. 对用手工TIG焊方法代替目前航空部队采用的手工电弧焊(SMAW焊)修理飞机起落架进行了初步探讨,并经试验得出了TIG焊的最佳焊接工艺。
- carbon arc weld 碳极弧焊
- The results show that the Shielded Metal Arc welding process has a significant effect on the corrosion performance of DSS. 结果表明,手工电弧焊工艺过程对双相不锈钢材料的耐点蚀性能具有显著的影响,点蚀优先发生在焊缝金属或焊接热影响区中。
- carbon arc weld(ing) 炭极弧焊
- Surfacing process was conducted by shielded metal arc welding process on 45 steel substrate using electrodes CHR207,CHR227,CHR237 under the same welding conditions. 采用CHR207、CHR227和CHR237堆焊焊条,通过手工电弧焊工艺在45钢基体上进行堆焊试验;
- carbon arc welding 碳弧焊
- Surfacing process test is made on Q235 steel substrate by shielded metal arc welding process using electrode CHR322 at different welding current condition. 采用焊条电弧焊工艺方法,选用CHR322堆焊焊条在Q235钢基体上以不同的焊接电流进行了堆焊试验。
- Technological process of CO2 gas shielded metal arc welding with stainless flux cored wire used for stainless steel tank construction is presented in this paper. 摘要介绍了采用不锈钢药芯焊丝CO2气体保护焊焊接不锈钢储罐的工艺过程。
- The harmonious control idea of the short circuiting transfer of the CO2 shielded arc welding is put forward in this paper，and its control system is set up. 提出了CO2气体保护焊短路过渡的和谐控制思想，并建立了相应的控制系统。
- CO2 gas shielded arc welding is one of the most important methods of welding and many scholars at home and abroad have putted forward a variety of ideological controls. 摘要CO2气体保护焊是当今国内最重要的焊接方法之一，国内外许多学者提出多种控制思想，而实现这些控制思想的前提条件是焊机本身要具有良好的可控性和快速的反应能力。
- Alternating current shield metal arc welding (SWAW) is the one of the most important welding method. 尤其是钢管的焊接部份，遮蔽金属电弧焊接法是最主要的方法之一。
- Abstract: The harmonious control idea of the short circuiting transfer of the CO2 shielded arc welding is put forward in this paper，and its control system is set up. 文摘:提出了CO2气体保护焊短路过渡的和谐控制思想，并建立了相应的控制系统。
- In there years, with the development of welding automation and arc welding robot, the amount of gas shielded wire are over a half of total amount of welding material. 近年来，随着焊接自动化和弧焊机器人的发展，国际上气保护焊丝的用量已超过焊材总用量的一半，在焊材中居主导地位。
- Surfacing process was conducted by shielded metal arc welding process on 45 steel substrate using electrodes CHR207, CHR227, CHR237 under the same welding conditions. 摘要采用CHR207、CHR227和CHR237堆焊焊条，通过手工电弧焊工艺在45钢基体上进行堆焊试验；
