您要查找的是不是：
- sheet steel lifting hook 薄钢板吊钩
- His lift hook is very devastating. 他的左钩拳极有威力。
- This type of sheet steel could stand high pressure. 这种钢板能抗高压。
- A low cycle fatigue (LCF) testing on 16MnL sheet steel is reported. 本文工作对汽车大梁所用的16MnL薄板钢材进行了低周疲劳试验研究。
- The stator is composed of laminations of high-grad sheet steel. 定子是由高质量的薄钢片叠制而成。
- Paper: (flat, sheet steel) was to prevent double sheet of paper. 分纸器：（平毛刷、钢片）防止双张纸被。
- Is the dependence along the workshop orbital direction longitudinal shift, car's derailing and lift hook's vibratory movement carries on the work. 是依靠沿厂房轨道方向的纵向移动、小车的横向移动和吊钩的升降运动来进行工作。
- The top end bracket shall be fitted with a stainless steel lifting bail and shall be capable of supporting the combined weight of the pump and motor. 顶部尾轴承架应该配置不锈钢吊环,应该能够支撑泵和电机的总重量的压力。
- Hot-rolled coil, for instance, the sheet steel for cars and fridges, rose from around$200 a tonne to more than$600. 例如热轧卷钢（来制造汽车和冰箱的板材）格从200美元一吨涨到了600美元一吨。
- SKF alignment needle roller bearings are fitted with a steel (fig 3) or sheet steel cage (fig 4). SKF对中滚针轴承配有钢保持架(图3)或薄钢板保持架(图4)。
- Pressed cages for SKF bearings generally are made of sheet steel and with some exceptions of sheet brass (fig). SKF轴承用的冲压保持架通常是用薄钢板制造,有些例外是用薄黄铜板制造的(图6)。
- The holes for the attachment bolts are reinforced by zinc plated sheet steel inserts. 为安装螺栓准备的孔都用镀锌钢板插入件加强。
- FRACTURE ANALYSIS OF THE LIFTING HOOK 吊钩断裂原因分析
- This quality dustbin is manufactured from galvanised sheet steel and corrugated for extra strength. Size: 18ins diam. 请报货送上海价;提供相关产品尺寸;材质;包装方式;装箱资料;最低订量以及贵司产品图片.
- The stability evaluation of the lifting hook group 起重机吊钩组稳定性的评估
- If the tank is made of sheet steel, clean it thoroughly to remove all dirt, chips, and burrs. 如果坦克是由钢板,清洗彻底去除污垢、薯片、毛刺。
- ZHC SERIES SINGLE MARINE-CARGO LIFTING HOOK BLOCKS ZHC系列单轮船用起货吊钩滑车
- a lifting hook catching things automatically 自动抓捕吊钩
- Bearing with intermediate ring and pressed window-type steel cages, protected by shields of sheet steel on both sides (fig 6). 带有中隔圈、钢板冲压保持架和薄钢板防尘盖的轴承(图6)。
- These housings (series P) are produced from cold rolled sheet steel and are protected against corrosion by a yellow chromate surface treatment. 这些轴承座(系列P)用冷轧钢板制造,表面经过黄色镀铬处理,以防腐蚀。
