您要查找的是不是：
- A trolley was used in concreting for the vertical wall. The sheet steel form on the trolley was braced by some exterior set bolts. The automatic agitating lorry (type AN3500) made in Yugoslavia and a concrete pump (type NP-74BTS) was used. 隧洞边墙混凝土施工采用外撑轨道式钢模台车，混凝土运输使用南斯拉夫产AN3500型自动拌和车，配合NP－74BTS型混凝土泵入仓。
- stereotyped big sheet steel form 定型大钢模板
- sheet steel form 钢模板
- This type of sheet steel could stand high pressure. 这种钢板能抗高压。
- A low cycle fatigue (LCF) testing on 16MnL sheet steel is reported. 本文工作对汽车大梁所用的16MnL薄板钢材进行了低周疲劳试验研究。
- The stator is composed of laminations of high-grad sheet steel. 定子是由高质量的薄钢片叠制而成。
- Paper: (flat, sheet steel) was to prevent double sheet of paper. 分纸器：（平毛刷、钢片）防止双张纸被。
- The probe introduces molt en steel form the steel bath into sampling chamber during blowing. 在吹氧时，钢水会自动进入到探头的取样盒内，形成对钢水的取样。
- Hot-rolled coil, for instance, the sheet steel for cars and fridges, rose from around$200 a tonne to more than$600. 例如热轧卷钢（来制造汽车和冰箱的板材）格从200美元一吨涨到了600美元一吨。
- We have used needle beam telescoping steel form in the Mao-Gong reservoir sediment tunnel in the concrete lining. 在庙宫水库排沙洞的衬砌施工中使用了针梁式混凝土衬砌钢模台车。
- SKF alignment needle roller bearings are fitted with a steel (fig 3) or sheet steel cage (fig 4). SKF对中滚针轴承配有钢保持架(图3)或薄钢板保持架(图4)。
- Pressed cages for SKF bearings generally are made of sheet steel and with some exceptions of sheet brass (fig). SKF轴承用的冲压保持架通常是用薄钢板制造,有些例外是用薄黄铜板制造的(图6)。
- The holes for the attachment bolts are reinforced by zinc plated sheet steel inserts. 为安装螺栓准备的孔都用镀锌钢板插入件加强。
- The tech-econornic rationality on using steel form jumbo for lining of tailrace tunnel of Shuibuya Hydropower Station is analysed. 对在水布垭尾水洞衬砌工程施工中,使用钢模台车的技术经济性进行分析。
- This quality dustbin is manufactured from galvanised sheet steel and corrugated for extra strength. Size: 18ins diam. 请报货送上海价;提供相关产品尺寸;材质;包装方式;装箱资料;最低订量以及贵司产品图片.
- If the tank is made of sheet steel, clean it thoroughly to remove all dirt, chips, and burrs. 如果坦克是由钢板,清洗彻底去除污垢、薯片、毛刺。
- Bearing with intermediate ring and pressed window-type steel cages, protected by shields of sheet steel on both sides (fig 6). 带有中隔圈、钢板冲压保持架和薄钢板防尘盖的轴承(图6)。
- These housings (series P) are produced from cold rolled sheet steel and are protected against corrosion by a yellow chromate surface treatment. 这些轴承座(系列P)用冷轧钢板制造,表面经过黄色镀铬处理,以防腐蚀。
- Control units for this series are composed by a galvanized sheet steel support with mounted all the apparatuses for remote motor control. 该系列控制装置是由镀锌钢支架和安装在支架上的所有元件组成,适用于马达遥远控制。
- It is shown that the strain strengthening will obviously improve the strength of sheet steel and the local dent resistance. 结果显示,单拉预变形过程的应变强化将显著提高钢板的强度和局部凹痕抗力。
