您要查找的是不是:
- Numeric Computation on Shear Yield Stress of Magnetorheology Fluids 磁流变液剪切屈服应力的数值计算
- Numerical Analysis on Shear Yield Stress of Magnetorheological Fluids 磁流变液剪切屈服应力的数值分析
- shear yield stress 剪切屈服应力
- Otherwise, the pastes with wide particle distribution have higher yield stress, lower dieland wall shear stress, and paste was easily extruded. 粒度分布较宽的含有细碳化硅的挤压物料具有高的屈服值和低的滑移膜初始剪切应力,使物料在模段内容易实现挤出。
- Various rheological indicators of xanthan gum, such as PVI, shear thinning, yield stress, creep and recovery, are determined to study its unique rheological property . 通过测定黄原胶各项流变指数,研究其独特的流变性能,探讨其应用于分散染料印花中作为增稠剂的可能性;
- The results show that the coatings with good application properties have larger apparent viscosity , higher yield stress , lower plastic viscosity and proper thixotropy at lower shear rate. 实验结果表明,使用性能良好的锭模耐火涂料在低剪切条件下,应具有较大的表现粘度与屈服应力,以及较小的塑性粘度和适当的触变性。
- The results show that the coatings with good application properties have larger apparent vis-cosity, higher yield stress, lowcr plastic viscosity and proper thixotropy at lower shear rate. 实验结果表明,使用性能良好的钨模耐火涂料在低剪切条件下,应具有较大的表现粘度与屈服应力,以及较小的塑性粘度和适当的触变性。
- Change of molecular magnetic moment of motherliquor and shear yield strength are studied in magnetorheological fluid. 对磁流变液中母液分子在磁场作用下磁矩的变化以及由此引起的剪切屈服强度的变化进行了研究.
- Yield stress is the stress at which a material begins to deform plastically. 屈服应力是材料开始发生塑性形变时的压力大小。
- Test Method for Yield Stress of Heterogeneous Propellants by the Cone Penetration Method (05. 用针入法测定非均质推进剂的屈服应力的试验方法(05。
- The relations between viscoelsticity and yield stress, thixotropy need to be studied for the theoretical breakthrough. 建议进一步研究含蜡原油粘弹性与屈服应力、触变性的关系,在机理研究方面加大力度;
- Viscoelasticity is related to some properties such as gel point, gel strength, yield stress and thixotropy. 粘弹性与胶凝温度、胶凝强度、屈服应力和触变性等参数有关。
- In this model, strain softening after the upper yield stress in the first 1/4 cycle is taken into account. 模型中考虑了材料在初始1/4循环加载时达到上屈服限后的应变软化现象。
- This paper introduced a new method of testing the static yield stress of electrorheological (ER) fluids. 本文介绍了一种新的电流变液静态屈服应力测试方法。
- SEP existed in core-shell str ucture in the PP matrix would induce craze and shear yielding effectively,exhaus ting impact energy massively. SEP以核-壳形态分布于PP基质中,有效地诱导PP基质产生银纹和剪切屈服,消耗大量的冲击能。
- The interfacial debonding, crazing and shear yielding are analysed when the interaction among the muIti-particle is taken into account. 考虑了粒了间相互作用后,给出了相应的基体内部应力场分布形式。
- If an applied stress or pressure drop is not sufficient to break the gel or exceed the yield stress, no flow will occur. 如果施加的应力或压降不足以破坏凝胶或不足以超过屈服应力,则不会有流动产生。
- The order of Casson yield stress was: Anguilla japonica Temminck et Schlegel>Ctenopharyngodon idellus> Ophiocephalus argus Cantor. 卡松屈服应力:鳗鲡>草鱼>乌鳢;
- double shear yield plasticity limit 双剪屈服塑性极限
- Moreover, it had better strength and anti-shear ability with elastic modulus 2.7kPa and yield stress 5.0kPa under a certain crosslinker concentration. 污泥水膨体吸水后的强度和韧性较好;在一定交联剂浓度下弹性模量和屈服应力分别达2.;7kPa和5