您要查找的是不是：
- Barton, N. R. and Choubey, V., “The Shear Strength of Rock Joints in Theory and Practice,” Rock Mechanics, Vol. 10, pp.1-54, 1977. 杨长义，岩石模拟材料之相似性选择原则，中国土木水利工程学刊，第10卷，第一期，第151-156页，1998。
- Different shear displacement histories mainly affect the shear strength of joints, and have a little relationship with the dilatancy property of rock. 在绘图程序中，例如存在单独的颜料应用工具，以及变形、剪切和粘贴的撤销命令。
- According to the factors of shear strength of rock discontinuities, the particularity of surface shape of rock discontinuities in Daxiling Tunnel is analyzed and the shear strength of rockdiscontinuities by Barton-Bandis model is discussed in detail. 从岩体结构面抗剪强度的影响因素入手，根据大溪邻隧道围岩结构面表面形态的具体特点，运用Barton－Bandis模型讨论了大溪岭隧道围岩结构面的抗剪强度。
- Prediction of shear strength of rock joint using support vector machine 岩石节理抗剪强度的支持向量机预测
- ESTIMATION THE BARTON EQUATION FOR THE SHEAR STRENGTH OF ROCK JOINTS 岩体节理抗剪强度的巴顿方程评价
- The Determination of Shear Strength of Rock Discontinuity in Margin Balance Analysis of Cut Slope 边坡极限平衡分析中结构面抗剪强度的确定
- shear strength of rock 岩体抗剪强度
- Paulino Pereira, J., “Shear Strength of Filled Discontinuities,” Proceedings of International Symposium on Rock Joints, pp.283-287, Norway, 1990. 李俊勋，非连续节理剪力强度趋动因子之研究，硕士论文，私立淡江大学土木工程学研究所，淡水，1996。
- The results show that the shear strength of COF is higher than that of COG. 结果表明 :COF比 COG的剪切强度高 .
- The shear strength of the composite is improved above to 11 MPa from 5.5MPa. 改性后碳 /聚芳基乙炔复合材料的剪切强度由 5 5MPa提高到 11MPa以上
- The shear strength of COG and COF bonded with ACF is studied by impact test. 摘要采用冲击试验方法研究了各向异性导电胶膜(ACF)互连的玻璃和柔性基板上倒装芯片（COG和COF）的剪切结合强度。
- DE Toledo Msc, P. E. C. and DE Freitas, M. H., “Laboratory Testing and Parameters Controlling the Shear Strength of Filled Rock Joint,” Geotechnique, Vol. 49, No. 3, pp.331-355, 1993. 赵振宇，岩石节理面力学性质与导水性偶合行为研究，博士论文，国立台湾大学土木工程学研究所，台北，1999。
- This layer of rock contains a lot of flint. 这一岩层中有大量燧石。
- The melting point and the shear strength of Bi-Pb-Sn-Cd fusible alloys were determined by DSC and tension tester. 利用差热分析仪和拉伸试验机;研究了易熔合金Bi-Pb-Sn-Cd的成分对合金熔点和剪切强度的影响.
- The mountain rise up in a steep wall of rock. 这座山高而陡，形成一道岩石屏障。
- The results showed that the shear strength of epoxy bonded joint decreased after it was aged in acid media. 结果表明，环氧胶接接头在酸性介质中老化后，其剪切强度明显降低；
- The mountain rose up in a steep wall of rock. 这座山高而陡，形成一道岩石屏障。
- The results showed that the shear strength of fractal joints decreases nonlinearly as the filling percentage increased. 结果表明，随着充填度的增大，分形节理抗剪强度总体上呈非线性减小。
- HY/PA can improve not only the transverse shear strength of CF/PA but also the longitudinal shear strength of KF/PA. 另外,HY/PA在改善CF/PA的横向剪切强度的同时,也改善了芳纶纤维增强尼龙复合材料(KF/PA)的纵向剪切强度;
- The results show that welding parameters do have influence on the microstructure and shear strength of welds. 结果表明，不同的焊接参数对于钢筋焊接网的剪切性能和组织有不同程度的影响。
