您要查找的是不是:
- The 1st reduction gearing is epicyclic type with an extended 1 st reduction shaft pinion coupled from the AC motor and driving the 1 st planets. 周转齿轴与交流电动机耦合,驱动一级行星齿构成第一级减速。
- The 3rd reduction gearing consists of three spur shaft pinions which are interference fitted to the 2nd reduction gears and one epicyclic gear (annulus). 第三极减速由三条齿轴与第二级减速齿和轮毂内侧环状齿圈分别干涉耦合构成。
- Remove the universal joint strap bolts at the pinion shaft yoke. 在小齿轮轴轴轭处拆卸万向节扣夹螺栓。
- Hold the yoke with Wrench 67Remove the pinion shaft nut and washer. 用扳手6719握住轴轭。拆下小齿轮轴螺帽和垫圈。
- The pinion shaft runs in porous bronze bearing bushes. 小齿轮轴运行多孔青铜轴承衬套。
- A slot for a key in the hub or shaft of a wheel. 键槽轮子的毂或轴里的键的沟槽
- Flexibility, as in the shaft of a golf club. 弹性,韧性柔韧性,易变性,如高尔夫球棒的柄
- There is something wrong with this pinion; it doesn't move. 这个小齿轮有问题,不转了。
- propeller shaft pinion flange 传动轴主动齿轮凸缘
- shaft pinion 小齿轮轴
- In rotating, the shaft splashes oil up into the bearings. 当轴旋转的时候就把油溅入轴承。
- A framework to support or strengthen a mine or shaft. 井壁基架用来支承或加固矿井的构筑
- A shaft on which a working tool is mounted, as in a dental drill. 心轴用于安装工具的蕊棒,如牙钻蕊棒
- The part of a machine shaft or axle supported by a bearing. 轴颈机械的转动轴或轮轴中由轴承所支撑的部分
- Refer to Drive Pinion Bearing Pre-Load Adjustment. 参阅驱动小齿轮轴承预荷调整。
- Worn teeth on ring gear or drive pinion gear. 环形齿轮或驱动小齿轮上齿磨损。
- Rotate the pinion yoke three or four times. 旋转小齿轮轴轭三次或四次。
- An inclined or vertical shaft or passage between levels in a mine. 小暗井矿井里层与层之间倾斜的或垂直的竖坑或通道
- Remove pinion gears from differential case. 从差速箱处拆卸主动齿轮。
- Install pinion front bearing, if necessary. 如需要,安装小齿轮前轴承。