您要查找的是不是：
- sand mold pig iron 砂型生铁
- A frame for holding a sand mold in a foundry. 砂箱铸造车间内保持砂模用的框架
- Pig iron used as permanent ballast. 压载铁做为永久性压舱物的生铁
- mold pig iron 铸铁块
- Pig iron is converted into steel by removing most but not all the impurities. 生铁变成钢要除掉大部分而不是全部的杂质。
- The medium chromium white cast iron has been pouring by green sand mold, and the effect of Cr? Si? Mn? 应用湿砂铸型浇注中低铬白口铸铁 ,采用正交试验研究Cr、Si、Mn、Cu对铸态中低铬白口铸铁力学性能的影响。
- Pig iron may contain 4% of carbon. 生铁约含有4%25的碳。
- The freighter carrying pig iron is cleaving through the water. 装着生铁的货船正在破浪前进。
- The abnormal structure usually appears at the surface layer of nodular iron castings produced by furan-sulfonic acid cured sand mold. 本实验研究查明,当用甲苯磺酸作催化剂的呋喃树脂自硬砂生产稀土镁球铁件时,通常在其铸件表层出现异常组织。
- Cannons are made here from pig iron and wood. 生铁和木头在这里被制成大炮。
- In order to improve the abrasion-resistant on the casting surface, the low-Cr cast iron matrix composite reinforced by WC particles in sand mold was made in the experiment. 摘要为了提高铸件表面的耐磨性，实验以低铬铸铁为基体，WC颗粒为增强体，制备出颗粒增强表面耐磨复合材料。
- This building makes muskets from pig iron. 生铁在这里被制成步枪。
- Pig iron may contain 4% of carbon . 生铁约含有4%25的碳。
- For martensitic high chromium cast iron, whether pre-impact or after impact, the metal mold cast one has better wear resistance than the sand mold cast one. 结果表明:当基体同为马氏体时,金属型高铬铸铁的耐磨性在冲击前、后都比砂型高铬铸铁好,冲击作用使金属型高铬铸铁的耐磨性略有降低而对砂型高铬铸铁的耐磨性影响较小;
- A furnace in which pig iron is converted into steel by the Bessemer process. 炼钢熔炉一种通过酸性转炉法将生铁练成钢的设备
- He asked us how much pig iron we could produce per day and calculated with us how much we could put out in a year. 他问我们每天能生产多少生铁，又跟我们一道计算一年内能生产多少。
- Abstract: One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced. 文摘:介绍一种在雕塑泥稿外直接制作铸造砂型的方法。
- One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced. 介绍一种在雕塑泥稿外直接制作铸造砂型的方法。
- What is the foundry's program for controlling the quality of incoming materials? E. G. Sand, core wash, scrap metal, pig iron, etc. 供应商怎样控制来料的质量?如:砂,废金属,生铁等。
- EPC has larger resistance than that of sand mold casting in pouring process, and need double pouring time. 在相同浇注条件下,实型铸造的充型阻力较砂型铸造的大,浇注时间增加约一倍;
