您要查找的是不是:
- same fill ratio 等填充比
- The an application form one and the same fill in three Copies. 注:本申请表填写一式叁份。
- In column charts and bar charts, a data series is represented by a series of bars in the same fill (color or texture). 在柱形图和条形图中,数列用一系列具有相同填充(颜色或纹理)的条表示。
- It showed that the filling ratio and the locatio... 充满度越高,所对应的接枝率增长量也就越大。
- To add the same fill to multiple shapes, click the first shape, and then press and hold CTRL while you click the other shapes. 要将同一填充添加到多个形状,请单击第一个形状,然后在按住Ctrl的同时单击其他形状。
- Using the datum curves from the twin screw extrusion experiment,the correlative factors influencing the fill ratio of screw are analysed. 利用双螺杆挤出实验中的实验数据曲线,对影响螺杆填充率的诸相关因素进行分析。
- The influences of working fluid, Fill Ratio of liquid and inclination angle on the thermosyphon operating were analyzed. 试验发现工质为水的热虹吸管的启动时间大于工质为酒精的热虹吸管;
- Lower aerosol velocity provides an active effect on capturing fine particles and higher fill ratio of ferromagnet media has an active effect on capturing big particles. 较低的气体流速有利于小颗粒的捕集,而较高的磁介质填充率对于大颗粒的捕集更为有利于。
- The particle capture efficiency rises with the increase of particle magnetization, magnetic field gradient and fill ratio of ferromagnet media, and it reduces with the increase in aerosol velocity. 磁场强度和磁介质填充率的增加可以提高颗粒的捕集效率,而气体流速的增大则会导致颗粒捕集效率降低。
- She and I can't live under the same roof. 她和我不能住在一起。
- She felt just the same as he did. 她和他的感受相同。
- Based on these work,the effect of the current,the filling ratio and the shape of electrode end on the distrib... 并以此为基础,研究了熔铸电流、填充比和电极端部形状对熔渣流速分布的影响,为实际生产提供了依据。
- After the screw geometrical frame and the assorted form of screw elements are chosen,there are different biggest screw fill ratios under different opertional conditions. 在螺杆几何结构及螺杆元件组合形式确定之后,不同的操作工况条件下对应有不同的螺杆最大允许填充率。
- The simulating results show the relations of filling ratio with time, filling mass rate with time and the ullage pressure with time. 计算域包括储槽内部,加注管路和侧满管路,通过程序仿真得到加注过程中加注流量、储罐内液体的充满率、储罐内的压力随加注时间的变化规律。
- These preventing measures include the control of the operating temperature, the filling ratio and speed control, spilling and leakage control etc. 其中包括操作温度的控制,投料配比和速度的控制,以及溢料和泄漏的控制。
- The results show that the greater casting thickness, rotating speed and radius of centrifugal casting are, the greater the filling ratio are. 试验结果表明,试样铸件厚度越大,离心半径越大,离心转速越高,铸件型壳的充填率越高。
- My wife murmurs the same thing day in and day out. 我妻子天天喋喋不休地重复同样的话。
- It must be difficult to play various personae in the same movie. 在同一个电影中扮演不同的角色肯定不容易。
- Under the two stress conditions mentioned above, the ultimate shapes of subsidence basin on surface and profile and filling ratio of a gob are all different. 在以上两种情况下,煤层覆岩最终垮落形态、下沉曲线形态和采空区的填充率也不相同。
- Every day he trod the same path to school. 他每天都走同一条路上学。