您要查找的是不是:
- Bearing with two double row inner rings with roller and cage assemblies. 带双列内圈的轴承,内圈带滚子和保持架组件。
- SKF needle roller and cage assemblies each contain rollers of one gauge of grade G2 (ISO 3096:1996 Grade 2). 每套SKF的滚针和保持架组件包括G2级单间距滚子(1996年的ISO 3096标准2级)。
- Bearings of this design have two pairs of tapered roller and cage assemblies, the two rows of rollers of the pair being arranged face-to-face. 这种设计的轴承有两对圆锥滚子和保持架组件,两列滚子面对面布置。
- From stud and yoke type track rollers to needle rollers and cage assemblies, NTN`s needle roller bearing lines covers all the bases. 详细描述 : NTN has a wide-ranging and hardy line of needle roller bearings that can withstand large loads and thrust options.
- Bearing with two single row inner rings and one double row inner ring with roller and cage assemblies. 带两个单列内圈和一个双列内圈的轴承,内圈带滚子和保持架组件。
- The dimensions of the needle roller and cage thrust assemblies correspond to ISO 3031:1979. 滚针与保持架推力组件的尺寸符合ISO 3031:1979标准。
- Details of these other needle roller and cage assemblies will be sent on request. 按照要求,可提供额外滚针和保持架组件的细节。
- Two double row inner rings with roller and cage assemblies; the inner rings are extended at one side. 两个带滚子和保持架组件的双列内圈;内圈在一侧延长。
- NAST) thrust needle roller bearings (AS + AXK) needle roller and cage components (K. NAST)推力滚针轴承(AS+AXK)滚针和保持架组件(K.
- Bearing with two single row inner rings and one double row inner ring with tapered bore (taper 1:12 or 1:30) with roller and cage assemblies. 带两个单列内圈和一个双列内圈的轴承,内圈带锥形孔(锥度1:12或1:30)、滚子和保持架组件。
- Bearings of the TDO configuration have one double row outer ring, or cup, and two inner rings with roller and cage assembly, or cones (fig 1). TDO配置的轴承有一个双列外圈或称圆锥外圈和两个带滚子与保持架组件的内圈或称圆锥内圈(图1)。
- To special order, SKF also produces special sizes of needle roller and cage assemblies, when the quantities required are economical. 根据特殊订单要求,当所需数量符合经济原则时,SKF还制造特殊尺寸的滚针和保持架组件。
- The TDI configuration (fig 2) which comprises one double row inner ring with two roller and cage assemblies and two outer rings. TDI配置(图2),包括一个带有两个滚子与保持架组件的双列内圈和两个外圈。
- The inner rings with roller and cage assembly and outer rings of SKF tapered roller bearings having the same designation are interchangeable. SKF圆锥滚子轴承中型号相同的带滚子和保持架组件的内圈和外圈可互换。
- The main difference is the configuration, or arrangement, of the roller and cage assemblies and the number of inner and outer rings dictated by this. 主要区别是滚子和保持架组件的结构或配置以及规定的内圈和外圈数量。
- The needle roller bearings without flanges are separable, i. E. The outer ring, the needle roller and cage assembly and the inner ring can all be mounted separately. 不带法兰的滚针轴承是可分离的,即外圈、滚针和保持架组件以及内圈都可分别安装。
- To facilitate their combination with needle roller and cage assemblies or the outer ring assembly of needle roller bearings, they have a lead-in at each side of the raceway. 为便于与滚针轴承的滚针和保持架组件或外圈组件结合,内圈在滚道两侧有引入槽。
- SKF needle roller and cage assemblies have a steel (fig 6) or sheet steel cage (fig 7) as standard except for those identified by the designation suffix TN. SKF的滚针和保持架组件的标准构成包括一个钢保持架(图6)或薄钢板保持架(图7),由型号后缀TN表示的组件除外。
- Tapered roller bearings are generally separable, i. E. The cone, consisting of the inner ring with roller and cage assembly, can be mounted separately from the cup (outer ring). 圆锥滚子轴承通常是分离型的,即由带滚子与保持架组件的内圈组成的圆锥内圈组件可以与圆锥外圈(外圈)分开安装。
- The TDO configuration (fig 1); bearings of the TDO configuration have one double row outer ring (cup) and two inner rings with roller and cage assembly (cones). TDO配置(图1);TDO配置的轴承有一个双列外圈(圆锥外圈)和两个带滚子与保持架组件的内圈(圆锥内圈),以及。