您要查找的是不是:
- ring- shear test apparatus 环剪实验机
- The depository for pressure test apparatus. 压力试验用具放置处
- Chengdu Chengbang Dynamic Test Apparatus Co., Ltd. 成都诚邦动力测试仪器有限公司。
- Standard compaction test and undrained direct shear test were carried out. 实验方式是采取标准压实试验及不排水直接剪力试验。
- shearing test apparatus 剪切试验仪
- Variation Rule of Shear Strength Index When Direct Shear Test of Coarse-grained Soil. 粗粒土直接剪切试验抗剪强度指标变化规律。
- For measuring abrasion of catalyst particles, three basic attrition test apparatus are used. 为了测定催化剂颗粒的磨损,可使用三种基本磨损测试装置。
- It is presented an experimental study on the bond behavior of NSM CFRP strips using a simple shear test set -up. 通过CFRP板条嵌入混凝土试块的界面单剪试验,研究粘结长度对界面粘结性能的影响。
- Finally use the dynamic three axle shear test to research impulsive load function under red clay mechanics and distortion characteristic. 最后通过动力三轴试验仪研究冲击荷载作用下红粘土的力学和变形特性。
- The dielectric voltage-withstand test apparatus shall be in accordance with Clause 16.20. 绝缘材料耐压性能测试设备应符合第16.;20条的要求
- Apparatus maintenance: On-off and calibrate the test apparatus, writing the records. 仪器使用:负责相关测试仪器的开关机和校验,并填写相关记录。
- In order to measure reaction times, test apparatus was fabricated in which a vertically closing window was modelled. 为了量测反应的时间,一个模拟垂直关闭的窗户被组装为实验的装置。
- The characteristic values of micro shear test and tensile test of aluminium alloy were determined and the quantitative expression of these characteristic values were studied. 通过测定铝合金微型剪切试验和拉伸试验的性能参数,研究得出了这些性能参数之间的数学关系式。
- The grounding continuity test apparatus shall be in accordance with Clause 16.19. 接地连贯性的测试设备要能达到第16.;19条中所列标准。
- The interlaminar shear strength of the composites was characterized by a short beam interlaminar shear test and a double edge-notched tensile shear test. 短梁剪切失效模式为假塑性,而拉剪失效模式为非假塑性破坏。
- At present, the conventional rock body mechanical test comprises a unidirectional compression test, a unidirectional tension test, a triaxial compression test and a shear test. 目前常规的岩体力学试验主要有单向压缩试验,单向拉伸实验,三向压缩试验,和剪切试验等。
- M.Mahaney, M.Shell, R.Storde, 1991, Use of the in-process bond shear test for predicting gold wire bond failure modes in plastic packages, IEEE IRPS, pp44-51, 1991. 陈永庆,2005,应用反应曲面方法求解封装焊线制程微细间距之最佳参数,硕士论文,国立中原大学,中坜。
- The standard API RP 5L3 for DWTT is introduced and compared with GB/T8363-1987. Then a discussion is given on the test apparatus required. 介绍了落锤撕裂试验的标准APIRP 5L3,并与GB/T8363- 1987标准进行了比较。 对所需的试验设备谈了一些看法
- First, use the he red clay original condition and the rebuilding condition separately to carry on the single axle solidifying compression test and the three axle shear test. 首先,分别对红粘土原状样和重塑样进行单轴固结压缩试验和三轴剪切试验。
- Shanghai KALEE WOPU Machinery Co., LTD has rich rechnology potence,advanced manufucture equip prefectcheck &test apparatus and management system. 上海开利涡普机械有限公司技术力量雄厚,生产设备先进,检测试验仪器俱全,并具有完善的管理体系。