您要查找的是不是:
- resultant cutting speed 合成切削速度
- Cutting speed influents chip dimension. 切削速度对切屑形状的尺寸大小有影响。
- Cutting speed, precision and consistency exceed quality standards. 其裁剪速度、精确度和裁片一致性都超过一般质量标准。
- Big cutter diameter, high cutting speed, good process quality. 刀具直径大,切割速度高,加工面质量好。
- There are many thingsthat should be considered in determining cutting speed. 在确定切削速度时,有许多因素应当考虑。
- The experimental result indicates that cutting speed,precise process and surface quality of the combined USM and ECM machining are all greatly improved compared with those of the USM or ECM. 试验结果表明,超声电解复合加工和单一的超声加工、电解加工比较可显著提高其加工速度、加工精度及表明质量。
- The result express that there are different laws of influence on the residual stress of machined surface when aluminum alloy be fine-cutted at different cutting speed,feed and cutting depth. 结果表明,硬质合金刀具薄切削铝合金时,切削速度、进给量、切削深度对已加工表面残留应力的影响具有不同的规律。
- Hard, strong metals require a lower cutting speed than soft and ductile materials. 硬度高而强度大的金属要求的切削速度比硬度小而韧性好的材料低。
- Robust construction, easy operation and fast cutting speed are among the feature of this machine. 本机结构坚固,操作方便,裁切速度快。
- The material of the gun reamer blade should meet the good abradability , the high cutting speed and the precision retentivity. 枪铰刀刀片材料选择应满足枪铰刀耐磨性好、高的切削速度、较好的精度保持性;
- As a result, higher cutting speeds can be achieved without putting excessive load on the cutter, so increasing tool life and reducing breakages. 如此则无需加载更大的力给刀具就能达到更高的切削速度,提高刀具寿命、减少刀具磨损。
- The operation is labor-saving and simple, with low malfunction, strong cutting power and high cutting speed. 操作省力、简单、故障率低、裁断力强、裁断速度快。
- Automatic tracking the cutting speed: do not need to change the cutting angle if the glass ribbon speed changed. 切割速度自动跟踪:玻璃带速度发生变化,不需要改变切割角度。
- The effects of cutting speed and feedrate are taken into account in milling process control. 得出在高速切削铝合金过程中,随着切削速度的增加,刀具与工件接触区的温度变化存在二次效应。
- Selecting candidate cuts and confirming result cuts are two phases during searching the cuts which are used to discretize continuous data. 选取用于离散化的断点一般分为两步,即候选断点的选择和结果断点的确定。
- The relationships between the cutting speed and a incised workpiece of intension, thickness are analyzed. 通过试验,分析了被切割工件强度和厚度与切割速度之间的关系。
- With a cutting speed and a high efficiency,the stonecutter can improve the mining ratio of mines. 具有高效的切割速度,可提高矿山开采率。
- F.Planar double-enveloping speed reducer is used for paper cutting drive, fast cutting speed, low noise. F.;切纸传动采用平面二次包络减速机传动,裁切速度快,噪音更低。
- Semifinishing and finishing of cast irons,non-ferrors metals &alloys and non netallic materials at medium cutting speed. 适于铸铁、有色金属及合金、非金属材料中等切削速度的半精加工和精加工。
- Based on cutting experiments, the effects of cutting speed and feed rate on surface roughness in high speed milling are investigated. 在高速铣削试验的基础上,研究切削速度与进给量对加工表面粗糙度的影响。