该词条未找到_海词词典

您要查找的是不是：

DSC was used to measure the exotherm during curing of the blend resin system. 3．通过DSC测试了共混树脂的固化放热性能，并比较了共混树脂在两类不同室温固化体系下的放热性能。
The results show that the comprehensive properties of room temperature curing DAIP resin system are better. ? 结果表明：室温固化DAIP树脂体系具有较好的综合性能。
The kinetic parameters and reactive mechanism of DAIP resin system in the presence TAC are studied. 本文主要研究了三聚氰酸三烯丙基酯(TAC)改性DAIP树脂体系的固化反应参数以及反应机理。
The results show that polyetherimide can not only toughen this resin system, but improve the dielectric performance. 研究表明，聚醚酰亚胺在改善氰酸酯树脂体系韧性的同时，也提高了树脂体系的介电性能。
A new kind of bismaleimide resin system which can be easily dissoled in aceton is prepared. 研制了具有良好溶液性质的双马来酰亚胺树脂体系的新方法。
Photon-Gated Spectral Hole Buming in Zn Tetrabenzoporphin-Crotonic Acid/Phenoxy Resin System[J]. 引用该论文施履青;张忠麟;堀江一之;姚绍明;张曼华;陈申;马宏伟;朱伯申.
The results show that polyetherimide can not only toughen this resin system,but improve the dielectric performance. 研究表明,聚醚酰亚胺在改善氰酸酯树脂体系韧性的同时,也提高了树脂体系的介电性能。
The results show that the comprehensive properties of room temperature curing DAIP resin system are better. 结果表明：室温固化DAIP树脂体系具有较好的综合性能。
Curing behaviors and exothermic peaks of spiro orthocarbonate/epoxy resin system were discussed by DSC(differential scanning calorimetry). 采用示差扫描量热法(DSC)对螺环原碳酸酯膨胀单体(SOC)/双酚A型环氧树脂(EP)体系的固化行为、放热峰进行了分析;
The title coatings has been prepared by use of melting intercalation technology to introduce the OMMT into epoxy resin system. 利用熔融插层法将有机蒙脱土引入环氧树脂体系,制备出含有纳米分散蒙脱土的无溶剂环氧涂料。
In this paper,a imidazole-salt was synthsised and was used with a polyphenol compound to modify the dicyandiamide curing epoxy resin system. 本文针对双氰胺固化环氧树脂时的固化温度高，固化产物耐湿热性差的缺点，利用自行合成的咪唑盐和多羟基酚类化合物，对双氰胺固化体系进行了改进。
If the seats are too close to the wall, but not the people around things will cause subconscious unease God resin system will affect the stability. 如果座位太贴近墙面，反而看不见四周的人事物，会造成潜意识的不安，也会影响到神精系统的稳定。
This paper reports the research of wet and heat resistantepoxy resin system and application of carbon/epoxy composite materials. 本文较详细地介绍了耐湿热环氧树脂的配方研究及碳/环氧复合材料的应用研究。
The toughness of cyanate ester resin(CE) is modified by epoxy resin(EP) , and the modified resin system was analyzed by IR、DSC and TGA. 用环氧树脂改善氰酸酯树脂的韧性,并借助红外光谱仪、差示扫描量热仪、热失重分析仪,研究了改性树脂浇铸体及其玻璃布层压板的性能。
The mechanism and kinetics of the curing reaction of epoxy resin system with boron-amine complexes containing oxaborinane are studied by means of IR and DSC. 用DSC和IR研究了含有恶硼杂环的硼胺络合物与环氧树脂体系的固化反应机理和固化反应动力学。
The effect of hydrotalcite and organo-hydrotalcite exchanged by laetamic acid on gelation time of low molecular weight polyamide/epoxy resin system was studied. 采用水滑石降低环氧树脂/低分子质量聚酰胺固化体系的凝胶时间。
This article has reviewed the development and progress of waterborne epoxy resin system at home and abroad,and described its preparation approaches and application fields. 总结了目前国内外水性环氧树脂体系的研究进展,并介绍了水性环氧涂料的制备方法与应用领域。
The OCN functional group formed triazine network via cyclotrimerzation for DNCY resin system and the addition of catalysts did not change its cure mechanism. 发现,氰酸酯体系所发生的固化反应都以氰基通过环化反应生成三嗪环为其特征,催化剂的加入对氰酸酯体系的固化机理并没有影响;
The activation energy of the resin system was estimated by the isoconversional method.The reaction mechanism was assumed to subject to an autocatalytic equation. 树脂体系的活化能通过等转化率法获得,假设反应机制服从自催化方程,应用本文中提出的区间法建立了树脂体系固化动力学模型。
Epoxy-bismaleimide (BMI) modified resin system was mainly prepared form epoxy, BMI and DDS.The curing reaction mechanism and the properties of the solidified resin were explored. 以环氧、双马来酰亚胺( BMI)和DDS为主要原料，制备环氧一BMI改性体系，研究了树脂固化物的性能和固化反应机理。