您要查找的是不是:
- resin bonded splint 树脂粘结夹板
- This product fits for mixing recycled resin bonded sand and soluble glass sand. 该系列产品主要用于再生后的树脂砂及水玻璃砂的混制。
- It is recycling machine for machine with acentric dry method, fits for recycling resin bonded sand and used sand. 该机是机械离心干法再生装置,主要用于树脂砂旧砂的再生。
- It for consolidating molding sand, such as resin bonded sand, as well as tamping sand, such as clay sand or self hardening sand. 本机主要用于树脂砂造型时型砂的振实,也可用于粘土砂造型或自硬砂造型实砂型的振。
- The grinding performances of resin bond diamond grinding wheel depend greatly on the performance of the bond resin. 摘要金刚石树脂砂轮的磨削性能在很大程度上取决于结合剂的性能。
- Nickel coated CBN products are used for resin bond system,the coating ensures good retention in the bond and long life. CBN镀镍产品用于树脂结合剂体系,表面镀层增加了结合剂对CBN晶体的把持力,提高使用寿命。
- Resin bond grinding wheels have characteristics of good self-sharpening,high grinding efficiency,low grinding... 树脂结合剂砂轮自锐性好,不易堵塞,磨削效率高,温度低,工件表面粗糙度较低。
- This paper studies a new method for developing resin bonded diamond ultrathin dicing blade based on rapid prototyping techniques. 本文以快速原型制造技术为基础,研究以光敏树脂作为结合剂的超薄金刚石切割砂轮片的快速制造技术。
- It is latest boiling rotor regenerating device which passes national patent and is designed with optimized technique, fit for reusing clay sand and resin bonded sand. 是采用国家专利并经优化设计的一种新型沸腾式转子再生机。主要适用于粘土砂及树脂砂的再生。
- Grinding performances of resin bond CBN grinding tools depend on their dressing technique, for which the dressing direction is the most important. 树脂结合剂CBN磨具的磨削性能取决于磨具的修整效果,磨具修整的效果关键在于其修整方向。
- Based on the analysis of the method used in foundry industry to describe the ability of reclaimer in resin bonded sand at present, a new method was recommended and tested. 在分析国内目前衡量树脂砂再生系统再生能力指标(脱膜率)的基础上,提出了一种新方法(脱膜速率).并用试验验证了该新方法的实用性和科学性。
- A steel rule die is introdused which have strengthen layers and have e-poxy resin bonded to the die board to stiffen the die board against flexing during handling. 介绍一种钢带模,含有多层加强层,并用环氧树脂粘到模板上,以防止在运送装卸模具过程中使模板弯曲,同时为防止钢带松动及提高模具使用寿命。
- Compared with that of furane resin bonded sand,the feasibility of phenol resin bonded sand in forming a uniform coating layer in the inside mould surface is studied as well. 本文分析研究了砂在铸型中的成型条件及光洁内表面的形成机理,并对比研究了覆膜和呋喃自硬砂在铸型内表面形成均匀覆砂层的可行性。
- Comparing with traditional claybonded sand or sodium silicate bonded sand, Resin bonded sand makes great possibility of cracking in castings, especially scattered tiny crack. 树脂砂较之传统的粘土砂或水玻璃砂工艺,其铸件裂纹倾向增大,尤以弥散性微细裂纹更为突出。
- The influence of the characteristic of the resin bond diamond wheels and grinding parameters on ferrite ceramics is studied by the grinding comparative experiments. 通过磨削对比试验研究了树脂结合剂金刚石砂轮的特性参数和磨削用量对铁氧体陶瓷表面粗糙度的影响;
- Grinding experiments were conducted on engineering ceramics, including alumina and yttria partially stabilized zirconia (PSZ), using resin bond diamond wheel. 摘要采用树脂结合剂金刚石砂轮,对氧化铝和氧化锆等2种工程陶瓷进行高效深磨磨削加工。
- She wore a metal splint on one leg. 她的一条腿上上了金属夹板。
- Resin bond grinding wheels have characteristics of good self-sharpening,high grinding efficiency,low grinding heat and no loading. The processed workpiece has good surface roughness.... 树脂结合剂金刚石砂轮自锐性好,不易堵塞,磨削效率高,温度低,工件表面粗糙度较低。
- The research results showed that resin bond could hold the self - sharpening diamond more tightly than ordinary diamond,for CSD diamonds have irregular shape, rough surfaces and many incurvated angle. 试验结果表明,由于CSD形状不规则,有许多凹入角和粗糙表面,树脂结合剂对CSD的把持力较普通金刚石强,所以在磨削各参数相同的条件下,自锐性金刚石砂轮与普通金刚石砂轮相比,其磨削比提高60%25以上。
- A strong durable resin bond provides high retention, improves marginal adaptation and prevents microleakage, and increases fracture resistance of the restored tooth and the restoration. 而修复效果与瓷和牙体组织间的粘结性能关系密切。