您要查找的是不是：
- removable back plate 可拆卸的后盖板
- Rough surface in front and back plate. 前面与后面支承板表面粗糙。
- Damaged back plate across the width. 后固定盖板在宽度方向上破损。
- Wider back plate to cylinder settings. 后罩板到锡林的隔距宽。
- Variation in setting between back plate and cylinder. 后固定盖板和锡林隔距差异大。
- Why the new rotary backing plate? 为什么说它是新的旋转底盘?
- The gauze disc (6) serves to hold the coiled wick tightly against the fuel charge, while the back plate (10) protects the washer. 纱网盘(6)用于保持导火索盘紧靠燃料块，后盘(10)用于保护垫圈。
- We mainly produce supermarket rack, warehouse storage rack, back plate& back mesh big rack, disk rack, bookstack, multifunctional shel fect. 本公司专业生产超市货架、储货架、板背网式大货架、碟架、架、功能置物架等系列产品。
- Cull out, that is, remove back faces; assume counterclockwise winding order for primitives. 剔除模式,剔除背面;假设图元顶点按逆时针顺序旋转排列。
- Remove back accessory from connector before contact being sent into connector, put crimped wire harness into back accessory. 在接触件送入连接器之前应先将尾部附件从连接器上卸下,将压接好的导线束装入尾部附件。
- Application and Features:The products are mainly used in a variety of shrimp removal back's catgut (open back, go catgut), output reached 100 kg / h. 用途及特点：本产品主要用于各种虾背部肠线的去除（背开;去肠线），产量达;100公斤/小时.
- The rooler pressurizes and the copper back plate adjustment is controled by the flowing tubing head pressure ,as well as steel shaving knife adjustment,The machine can be used on the pperation board. 本机由油压控制辊筒加压、铜挡板的调节以及钢刮刀的调整，可在操作面板上控制使用。
- In a printer, the removable type element. 印刷机上可拆卸的打印部件。
- Rose bushes shoot again after being cut back. 玫瑰丛修剪後还能再长出新枝。
- All wire burned sections are to be mounted in hardened tool steel with hardened backing plate. 所有的线割入子必须安装在热处理的模板上并有热处理后的支撑板。
- What this means is the auger, (the threaded part to which the backing plate attaches), is driven directly off the electric motor. 它是一个螺丝钻（背面有图案装饰的）可直接切断电源。
- This coffee-maker has two removable parts. 这个煮咖啡器有两个部分，可以拆开。
- A hinged or removable section for a table top. 活动桌面桌子上部有铰链连接或可移动的部分
- The new "Easy Buff" Rotary Backing Plate is technology borrowed from our OEM Polishing System used at the car factories. 新的旋转底盘是借助于OEM抛光系统在汽车制造厂使用的技术。
- The backing plate shall be welded with matching electrodes so that the weld on the clad side is flush with the backing plate surface. 底板用配套焊条焊接，使复层侧的焊缝与背衬板表面齐平。
