您要查找的是不是:
- The macrohardness of welded surfacing layers is HRC60,the relative wear resistance is 21 times higher of steel Q235. 堆焊层硬度为HRC60,相对耐磨性为Q235钢的21倍。
- In addtion , when the wear resistance of Cr3 is regarded as "1" and the impact loads is enhanced , the relative wear resistances of Crl and Cr2 are decreasing . 而且,把Cr3的抗磨性看作1时,Cr1、Cr2的相对抗磨性都随冲击载荷的增加呈下降性趋势;
- Keywords sulfurizing;optimization of process;relative wear resistance; 渗硫;工艺优化;相对耐磨性;
- Keywords polysrys;tallime diamond composites;interrmdiate transiting phase;relative wear resistance; 烧结型聚晶金刚石;中间过渡相;相对耐磨性;
- relative wear resistance 相对耐磨性
- High wear resistance and good toughness properties. 具有高的耐磨性和良好的韧性。
- It was proved that electrods relative motion speed coupled with plating voltage has decisive effect on the brightness and wear resistance of the film. 其中电极速度与施镀电压的配合,对光亮度和耐磨性的影响有决定性的作用;
- Highest wear resistance for low strain of toughness. 具有最高的耐磨性、在低应力条件下具有最好的韧性。
- For high strain of toughness and good wear resistance. 在高应力条件下具有好的韧性和高的耐磨性。
- Good characteristics for toughness and wear resistance. 具有好的耐磨损和韧性。
- Wear resistant ceramics machine parts. 耐磨陶瓷用作机械零件。
- Urumqi Xinzhou Wear Resistant Material Co., Ltd. 新轴耐磨材料有限公司。
- It has a hard and tough film, wear resistance and excellent colour retention. 具有漆膜坚硬、耐磨,保色性好等特点。
- ER5 is a cold work die steel with high wear resistance and toughness. ER5是一种高耐磨冷作模具钢。
- The wear resistance of in-situ Ti-TiC-TiB composites were investigated. 采用摩擦磨损试验机检测了两种材料的抗磨损性能。
- Good hardness and wear resistance, moderate impact resistance in the series . 辊环系列中硬度和耐磨性较高,抗冲击性适中。
- Fabrics made with velveteen, karyotyp skinpass of glossy wear resistance. 平绒的布面绒毛平整,光泽好,耐磨性好。
- Recommended for important wear resistant structures. 本产品可推广应用于重要的耐磨钢结构。
- The cutting tool must be strong, tough, hard, and wear resistant. 刀具必须具有强度、硬度、韧性和耐磨性。
- Drug resistance,dustproof,seamless safety,hyguiene,non-toxic,odurless,easy to clean,goodinsulation,wear resistance. 耐药品性佳、防尘、平滑无接缝、安全、卫生、无毒、无臭、易清洁维护、绝缘、耐磨。