您要查找的是不是：
- Using SHS Reactive Flame Spraying (RFS) technology, an Al2O3 multi-phased ceramic coating was prepared on iron substrate with Al and CuO as main reactants, the SHS process was ignited by oxyacetylene flame. 基于自蔓延高温合成技术(SHS)的反应火焰喷涂技术,用氧?乙炔火焰引燃Al?CuO团聚粉,使之发生自蔓延反应,在钢基表面制备了Al2O3复相陶瓷涂层。
- reactive flame spray 反应火焰喷涂
- reactive flame spray (RFS) 反应火焰喷涂
- SHS reactive flame spray SHS反应火焰喷涂
- Keywords SHS;reactive flame spraying;ceramic coating;mechanism; 反应火焰喷涂;陶瓷涂层;机理;
- reactive flame spraying 反应火焰喷涂
- BSP-1 flame spray gun (implement type) and thermal spray plastic powder is experimentally studied. 对BSP-1型火焰塑粉喷枪(改进型)及热喷涂用塑粉、工艺进行了研究。
- XT-P1007 unsaturated polyester resin is reactive flame retardant resin, pultrusion process for the production of specialized fire retardant products. P1007不饱和聚酯树脂是反应型阻燃树脂，专门用于生产拉挤工艺阻燃产品。
- As one of the materials ,the reactive flame retardants have nonmigratory, durable performance, insulate thermal, inhaibit smoke and so on. 反应型阻燃剂作为材料的组成部分不迁移、性能持久，具有良好的隔热、隔氧、抑烟功能，并防止产生熔滴。
- Powder flame spray and spray fusig gun, with various powder nozzles attached, can do spray coating with fine metallic powder and ceramic powder. 粉末火焰喷涂喷焊设备,配有各种粉末喷嘴,能喷涂金属微细粉末和氧化物涂层。
- Powder flame spray or spray fusing gun can be used with inert gas to feed powder with best coating effects,and can also be used for spary of ceramic powder. 粉末火焰喷涂喷焊设备。用惰性气体送粉，能得到更佳涂层品质，也可喷涂氧化物涂层。
- The new reactive flame retardant 2,4,6 tribromo N,N bis (2 hydroxylethyl) aniline was prepared with aniline, epoxy ethane and bromine as the raw materials. 以苯胺、环氧乙烷和溴素为原料,研究了新反应型阻燃剂N,N-二(2-羟乙基)-2,4,6-三溴苯胺的合成方法,用红外光谱和元素分析等方法确认了其化学结构。
- Powder flame spray or spray fusing gun can be used with inert gas to feed powder with best coating effects, and can also be used for spary of ceramic powder. 粉末火焰喷涂喷焊设备。用惰性气体送粉,能得到更佳涂层品质,也可喷涂氧化物涂层。
- Through the process test、wearing test and microstructure observation and analysis,the convention performance of oxygen-acetylene flame spray welded layer is studied. 通过工艺试验、耐磨试验和显微组织观察分析,研究了氧-乙炔火焰喷焊层的常规性能。
- Briefly introduce oxy-acetylene flame spray's equipment,dusty spray,spray technology and application example,which provides a basis for the correct usage of the technology. 简要介绍了氧-乙炔火焰喷涂的设备、喷涂粉末、喷涂工艺以及应用实例,为正确使用该项工艺提供依据。
- Thecoating is made by using an oxy-acetylene flame spraying process. 涂层采用氧-乙炔火焰喷焊工艺制成。
- Dysprosium lithium borate (DyLB) glasses with three different compositions were prepared by traditional melting process in the system of Dy_2O_3-Li_2O-B_2O_3,and then were made into glass microspheres using flame spray spheroidization process. 用火焰飘浮法制备了 3 种组成的镝锂硼(Dy2O3 Li2O B2O3;简称 DyLB)玻璃微球.
- The anatase contents in P25, ST-41 and liquid flame sprayed TiO2 powders were 85%, 100% and 95%, respectively. P25粉末、ST-41粉末及液料火焰喷涂粉末中锐钛矿相含量分别为85%25、100%25和95%25。
- Ni-based and Co-based alloy coatings were made on the Q235 steel substrate by oxy-acetylene flame spraying and fusing. 采用氧乙炔火焰喷熔法在Q235钢表面制备了镍基和钴基合金涂层。
- The cold end of the SER element is flame sprayed with aluminum for a distance of about two inches. 对冷端部进行喷铝是要保持大约两英寸的距离。
