您要查找的是不是:
- The reaction sintering process and production process of ternary boride base cermet produced by reaction sintering method were introduced. 介绍了用反应烧结法制备三元硼化物基金属陶瓷的反应烧结过程及一般制备工艺过程;
- An Al2O3TiC/Al insitu composites prepared by hightemperature reaction sintering of the AlTiO2C system was investigated, and the effects of process parameters on the microstructure of the Al2O3TiC/Al composites were discussed. 以Al?TiO2反应体系为基础,添加适量石墨粉,压制后在不同温度下进行反应烧结,从而确定了获得反应完全的Al2O3?TiC/Al铝基复合材料的烧结工艺参数,并对该复合材料的组织性能及反应机理进行了分析讨论。
- The keltooling is a combination of a casting and a sintering process. 法结合了铸造和烧结两种方式。
- "Sidewall effect" is one intrinsic phenomenon in the sintering process . “边缘效应”是烧结过程中固有的现象。
- Hydroxyfluorapatite (FHA) bioceramics of different fluorine content were prepared by the method of solid reaction sintering. 采用固相反应热烧结法制备不同氟含量的含氟羟基磷灰石(FHA)生物陶瓷。
- As a result,the degree of utilization of bauxite resources by the Bayer Process is lower than that by the Sintering Process. 铝土矿资源利用率高低首先与采用工艺相关,拜耳法的资源利用率低于烧结法。
- This paper introduces formation mechanism of overdamp layer and analyzes the effect on sintering process. 介绍过湿层形成机理,分析过湿层对烧结工艺过程的影响。
- In this paper,the characteristic of microstructure of different ZTM composites obtained by reaction sinter was analyzed by means of the ZEM images. 利用电子扫描电镜重点研究了以锆英石与氧化铝、A级铝矾士为原料反应烧结锆莫来石复相陶瓷材料的显微结构。
- The pressureless sintering process adding Y 2O 3 and Y 2O 3+La 2O 3 as sintering aids was studied. 研究了以Y2 O3 和Y2 O3 +La2 O3 为烧结助剂的Sialon陶瓷的常压烧结过程及其相结构。
- Accordingly, the degree of degradation is observed to enhance if the period of the sintering process is too long. 由此发现过度加长烧结时间有加速劣化的趋势。
- Metal Injection Molding, One step Vacuum de-wax sintering process, Powder metallurgy monthly. 1金属粉末射出成型真空一次脱蜡烧结法;粉末冶金月刊.
- The burning trough point (BTP) is an important factor and a key parameter to the operation of the sintering process. 摘要烧结终点是烧结操作的主要依据,是烧结过程的关键参数;
- This is because nano-silica can accelerate the sintering process and promote the densification of corundum castble. 这是由于纳米二氧化矽能够促进刚玉浇注料的烧结,使结构致密化所致。
- In the sintering process, it is essential that sinter is established economically and reasonably. 合理经济地确定烧结配料问题,具有十分重要的意义。
- Pictures of high temperature microscope show that the sintering process can be divided into four stepps. 高温显微镜图片表明,制品的烧结过程可以分为4个阶段。
- The paper describes the technology for the preparation of ITO sputter target by CIP and sintering process. 采用冷等静压-烧结法制备了ITO磁控溅射靶材。
- The result showed that burying sintering process may make breakdown voltage smaller and apparen. 结果表明,采取粉料埋烧可以明显降低压敏电压、提高介电常数。
- Diopside-based glass ceramic was made with steel slag and fly ash by sintering process. 以钢渣和粉煤灰为主要原料,采用烧结工艺,制得以透辉石为主晶相的微晶玻璃;
- A new kind of process sintering process is dealt with manufacturing hammers of the hammer mill. 提出了粉碎机锤片的烧结新工艺,并且系统研究了烧结配方、工艺参数。
- hot pressing reaction sintering joining 热压反应烧结连接