您要查找的是不是：
- raw gas temperature 荒煤气温度
- When that happened, raw gas spilled out and frequently ignited. 如果出现这情况,汽油就会溢出,常常因此而着火。
- It relied on exhaust gas temperature (EGT). 就靠排气的温度，看到的都是单线和双线的氧传感器。
- The GGH seal air fan ensures zero leakage of the raw gas to the environment. 热交换器的密封风机以确保没有原烟气泄漏到环境中。
- The major factors is excess air and flue gas temperature. 影响注汽锅炉运行热效率的主要因素是排烟温度和空气系数,测算分析表明,大部分注汽锅炉二者均超标。
- As a raw gas for carburzing,it is necessary to desulphurize in the natural gas sufficiently. 所以作为渗碳用原料气必须对天然气充分脱硫。
- After field sideline test,PALL filter with high filtration accuracy was selected for filtering and separating raw gas. 经过现场侧线试验,选择了过滤精度高的PALL过滤器过滤分离原料天然气。
- In this poly-generation system, the components and physic parameters of raw gas for generating electricity are variable with operating conditions. 在此多联产系统中,用于发电的粗煤气的成分和物理参数会随系统的运行状况而发生变化。
- The progress of adsorbing agent materials and adsorption technologies for removing sulfides from raw gas and fuel oil at home and abroad is reviewed. 综述了国内外原料气和燃料油吸附脱硫技术在吸附脱硫材料和吸附脱硫工艺方面的研究与开发进展。
- However, for certain temperaturesensitive materials the inlet gas temperature must be lowered. 但是，对于某些温度敏感的材料，进入的气体温度必须降低。
- However, for certain temperature sensitive materials the inlet gas temperature must be lowered. 但是,对于某些温度敏感的材料,进入的气体温度必须降低。
- By means of an air damper,the micropressure of raw gas from coke-oven can be auto-controlled ,so that the operation is smooth and the economic benefits are improved. 应用气动阻尼器，实现焦炉直立炉荒煤气微压自动调节，稳定生产工艺，提高经济效益。
- This paper ensures the math model of gas temperature of cement decomposing furnace exit by analyzing its character. 摘要通过对水泥分解炉的特性进行分析，确定了出口气体温度的数学模型。
- The network was compared with recurrent neural network (RNN) by predicting exhaust gas temperature (EGT). 分别利用递归神经网络和双隐层过程神经网络对发动机排气温度裕度进行仿真预测。
- The influent of the exhaust gas temperature and inlet air temperature to PGT10 gas turbine is presented. 介绍了出口乏气温度、入口空气温度对PGT10燃气透平的影响;
- The waste gas temperature and convulsion negativepressure are main craft parameter agglutinates of the end-point. 废气温度和抽风负压是烧结终点控制的主要工艺参数。
- Thereby, the efficiency would enhance while the flue gas temperature in back-end ductwork is appropriately chosen. 较低的尾部烟气温度有利于提高SO2溶解度，从而提高灰浆脱硫的能力。
- The magnitude of the turbulence then follows directly from the observed line with if the nebular gas temperature is known. 如果已知星云气体的温度，则湍流的大小可直接从观测的谱线宽度得出。
- The rising position of gas temperature was stabled by adjusting pallet speed, and the short-term control was carried out. 短期控制通过调整机速，稳定废气温度上升点实现。
- The distributions of gas temperature, O2, CO2, CO, and NO concentrations were measured under different swirl numbers for the primary air. 测量了在不同的一次风旋流数下,气体的时均温度、O2、CO2、CO和NO浓度的分布。
