您要查找的是不是：
- In this paper, the preparation principle and the processing of magnesium alloy ribbon chip is introduced, the effect of subsequent heat treating of rapid solidification strip chip on the microstructure is analyzed. 文中介绍了镁合金快速凝固薄带碎片的制备原理及工艺方法,分析了后续热处理对快速凝固薄带碎片微观组织的影响。
- rapidly solidified strip 速凝薄片
- Al Pb binary monotectic alloys were prepared using the rapidly solidified gas atomization technology. 采用雾化快速凝固技术制备了Al?Pb二元偏晶合金。
- Also, the rapidly solidified layer was unalloyed when the electrode (Cu) was set to be the anode. 此外，以纯铜为电极(正极)时，则发现急速凝固层未发生合金化。
- The morphology of microstructures and precipitatng phases of rapidly solidified Al 7.83 Fe alloy ribbon have been studied by TEM. 用透射电镜观察了快速凝固Al?7?83Fe 合金的组织形貌和相结构。
- The properties and applications of epoxy phosphate latex were studied using the method of rapid solidified membrane. 采用快速固化成膜的方法,对环氧磷酸乳液的性能与应用进行了研究。
- Differential Scanning Calorimetry (DSC) was used to study kinetic charateristics of transformation on quasicrystalline phases in a rapidly solidified Al Fe (Cr, Mo) Si alloy. 利用示差扫描量热仪（DSC）分析方法，研究了快凝Al?Fe?（Cr，Mo）?Si合金中准晶相的转变动力学特征。
- This paper has made a present situation review and a future development prospect of researches on rapidly solidified high strength and high conductivity copper alloys. 本文综述了快速凝固高强度高导电率铜合金的研究现状,并对将来的发展趋势作了展望。
- By microstru cture analysis the evolutive characteristic of structure of rapidly solidified C u-Zn alloy in different temperature preservation was initially made clear. 通过金相组织分析，初步摸清铜锌合金快速凝固组织在不同温度下保温组织演变的特点。
- The surface micromorphology of rapid solidified aluminium base solder strips was observed using optical microscope and scanning electron microscope. 通过金相显微镜和扫描电镜对急冷铝基纤料箔两个表面的观察分析表明，急冷钎料箔正面和自由面的微观特征明显不同。
- The effect mechanism of thermal history of the melt on the phase formation of the rapidly solidified Al Fe based alloys and the phenomenon of which the melt kinematic viscosity dur... 有效地解释了熔体热经历对快凝铝铁基合金中相形成的影响机制，以及长期以来不易理解的、加热过程中熔体的运动粘度比冷却过程中熔体的运动粘度为小的现象。
- The process fundamentals and characteristics are described in this paper,and recent research and ap-plications of spray deposition technique on rapidly solidified materials are reviewed. 简要介绍了喷射沉积技术的基本原理和特点,对其在快速凝固材料中的应用进行了综述。
- Spray deposition is a novel rapid solidification technique, which has been used to manufacture rapidly solidified materials with high properties. 摘要喷射沉积是一种新型的快速凝固技术，被广泛用于研究和开发高性能的快速凝固材料。
- In the present study, the AZ91 magnesium alloy strip chip is prepared by twin-roll rapid solidification technique, it is find that the microstructure is fine; the average microhardness is higher than that of the traditional cast alloy. 本研究利用雾化技术将液流破碎成细小液滴,用双辊熔体旋铸法制备了AZ91镁合金薄带碎片,其微观组织细小,平均显微硬度比铸态的有很大提高。
- rapidly solidified microcrystalline alloys 快冷微晶合金
- The solidifying times of rapidly solidified powder coating materials are in close agreement with the results of conventional differential thermal analyses. 用该加热池测定快速固化粉末涂料的固化时间，其结果与经典的差热分析方法相近。
- The novel consolidation processing for rapidly solidification and research development of rapidly solidified high-performance magnesium alloy are reviewed. 摘要综述了快速凝固新型固结成形工艺及快速凝固高性能镁合金的研究进展；
- rapidly solidified magnesium alloy 快速凝固镁合金
- rapidly solidified powder metallurgy 快速凝固/粉末冶金
- Elephants strip the leaves from trees. 大象剥去了树上的叶子。
