您要查找的是不是:
- Connect the lower radiator hose. 连接下侧散热器软管。
- The tangs on the hose clamp must be positioned straight down. 必须将管夹中的尖柄垂直向下。
- Remove the upper radiator hose and coolant recovery hose. 拆卸上散热器软管和冷却剂回收软管。
- Remove the upper radiator hose and coolant tank hose. 拆卸上散热器软管和冷却剂箱软管。
- Engine: Connect the lower radiator hose at the water pump. 0公升引擎:于水泵处连接下侧散热器软管。
- Mini hose clamp are made of carbon steel and AISI 300 stainless steel, are made as per ABA standard. They are widely used in Automobile area. 迷你喉箍制成的碳素钢和艾西300不锈钢制成;作为每阿坝标准.;它们广泛应用于汽车领域
- Connect the upper radiator hose and heater hose at the engine thermostat housing. 在引擎恒温器外壳上,连接上散热器软管和加热器软管。
- Remove upper radiator hose. 拆卸上部散热器软管。
- TYPICAL CONSTANT TENSION HOSE CLAMP 典型的冷却剂伸缩软管夹
- Each unit includes a full set of filters,25' of12" PVC flex duct a12" duct mounting flange and2- quick connect hose clamps. 每个系统包括一套完整的过滤器,长25"直径12"的软管,12"的管道法兰,卡箍钮。
- Each unit includes a full set of filters, 25'of 12" PVC flex duct a 12" duct mounting flange and 2-quick connect hose clamps. 每个系统包括一套完整的过滤器,长25"直径12"的软管,12"的管道法兰,卡箍钮。
- radiator inlet hose clamp 散热器进水软管夹
- Engine Only: Remove the lower radiator hose at the water pump en 0公升引擎只能:于水泵端拆卸下侧散热器软管。
- The wood is held in position by a clamp. 木头用钳夹固定住了。
- radiator outlet hose clamp 散热器出水软管夹
- In regard to product technology, we have imported the EO rigid pipe ferrule technology and No-Skive hose clamping technology so as to ensure the technical requirements of reliability and no leakage for the fluid circuit. 在产品技术上我们引进EO硬管卡套技术和无需剥胶的软管扣压技术,确保液压系统管路的可靠性、无泄漏的技术要求。
- Fill your radiator with water, or your engine will overheat. 给你的散热器充水,否则引擎会过热。
- The radiator is giving out a lot of heat. 散热器释放出很多热量。
- Clamp these two pieces of wood together. 把两根木头钳紧。
- Clean the car from the top, preferably with a hose and warm water. 最好用软管和温水从顶部开始清洗汽车