您要查找的是不是：
- Sintered metal bushes - Determination of radial crushing strength 烧结金属衬套。径向抗压强度的测定
- Study on Radial Crushing Strength of Ceramic-lined Steel Composite Pipe 陶瓷内衬复合钢管径向压溃强度分析
- Standard Test Method for Radial Crush Strength of Extruded Catalyst Particles 挤压催化剂颗粒辐射状压碎强度的标准试验方法
- Method for determination of radial crushing strength constant of metal powder sintered bearing, oil impregnated 金属粉末烧结轴承径向压应力常数测定方法
- Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles 挤压催化剂颗粒辐射状压碎强度试验方法
- radial crushing strength 径向抗压强度
- Long inner and outer bronze sleeves allow radial crushing forces to be distributed over a wide area. 宽大的内外青铜管套可迫使径向压毁力分散到更大区域。
- For extrudates there are side crushing strength tests, bulk crushing strength tests, abrasion tests. 对挤条产品有侧压强度的测试，堆积强度测试和耐磨测试。
- How can we take that crush strength and back-calculate the maximum height to which the reactor can be loaded? 我们如何得到抗碎强度并反算出反应器所能装载的最大高度呢?
- In selecting a refractory for a particular use, we should consider the texture, the crushing strength, and the chemical composition of the material. 为特定用途选择耐火材料时，要考虑其质地、抗碎强度和成分。
- It has proved that the PU micropheres prepared by this method have high resistance,high crushing strength and good adsorbability. 证明了用本法所合成的PU微球有较好的抗耐性，较高的抗压强度和较好的吸附性能。
- Crushing strength,bending strength,bulk density,thermal shock resistance and heat expansion coefficient ofthe samples prepared were tested. 为了比较2种制品,分别对其进行了抗压强度、抗折强度、热膨胀系数、热震稳定性测试及微观形貌观察。
- The Water absorption (Wa), Porosity (Pa), Bulk density (D) and crushing strength, acid resistance, alkali resistance have been tested. 测试了样品的吸水率、气孔率、体积密度以及压碎强度和耐酸耐碱性。
- The physical properties of catalysts such as specific surface area, pore volume, stacking density and crushing strength were tested. 测定了催化剂的比表面积、比孔体积、堆积密度和压碎强度等物理性质参数。
- The typical product has the following physical properties: bulk density 0. 86 g/cm3, cold crushing strength 4. 2 MPa, flexure stre... 该制品具有隔热性能好、使用温度高、热容小等特点,是间歇式窑炉轻质耐火内衬的理想材料,可替代同类型的进口产品。
- hydroforming with radial crushing 径压胀形
- In selecting a refractory for a particular use, we should consider the texture, the crushing strength , and the chemical composition of the material. 为特定用途选择耐火材料时，要考虑其质地、抗碎强度和成分。
- On the analytical foundation of the flat crush test of honeycomb paperboard, the crush strength and the method of cushion design of honeycomb paperboard were discussed. 摘要在分析蜂窝纸板平压试验结果的基础上，讨论了蜂窝纸板的压溃强度和用能量吸收理论设计蜂窝纸板缓冲垫的方法。
- The use of POP colors also avoids issues involving melt fracture or excessive parison hang time and aids column crush strength. POP色料的使用还能避免涉及熔体破坏或过多的型坯停留时间，并且有助于推叠承压强度。
- Influence preparation of parameters on crushing strength of the support for residue oil hydrodemetalation catalysts was investigated through experiments. 本文通过实验，探讨了制备条件对渣油加氢脱金属催化剂载体机械强度的影响。
