您要查找的是不是:
- Quick closing valves, water hammer or supply pressure fluctuations can cause intermittent discharge. 迅速关闭阀门,水锤或供应压力波动可能导致间歇排放。
- Reconstruction of the Quick Closing Valve of a Feed Water Pump's Driving Steam Turbine 给水泵汽轮机速关阀的分析和改造
- Design of a Hydraulic System for a Three-eccentricity Quick Closing Valve and Simulation of its Dynamic Characteristics 三偏心快关阀的液压系统设计与动态特性仿真
- Fuel Oil Quick Closing Valve 速闭阀
- quick closing valve 高速阀,速闭阀
- quick close valve 速闭阀门
- Close valve completely before installation. 安装前要完全关闭阀门。
- Where possible, leave the wrench on the valve so a quick closing of the valve can be made in the event of an emergency. 在可能的地方;把扳手留在阀门上;以便在紧急情况下可以迅速的关闭阀门.
- Close valves at both inlet and outlet ends. 进、出水端阀门关上。
- Equipped with hydraulic check feature to close valve on pressure reversal. 配置液压止回阀来阻止阀门的压力逆向。
- Hinge? designed to withstand the shock load of quick closing to insure longer life and continued shut-off. 铰链-能够承受迅速关闭而产生的冲击负载,确保使用寿命更长和连续关闭。
- The electrical connection to the filter is done by a quick closing multipole plug. 与过滤器的电子连接由一个快的关闭的多极的插座完成。
- Mark, the furthest behind, notices the huge dog quickly closing in. 马克,落在最后,发现了后面快速逼迫而来的大狗。
- Our rugged hinge pin/hinge and disc construction is designed to withstand the shock of quick closing and provides years of service. 我们坚固的铰链销/铰链和阀瓣结构适用于承受迅速关闭所产生的冲击,延长了使用寿命。
- If cylinder does subcool, close valve and allow cylinder to warm up.DONOT APPLY HEAT! 如果钢瓶没有过冷,关闭阀门让钢瓶升温。
- Power off auto closing valve protection function and emergency stop protection function can prevent material form overflow. 断电自动关阀保护功能,紧急停止保护功能,防止物料意外溢出发生。
- Inflate the Therm-a-Rest mattress by mouth as hard as possible, then quickly close the valve. 用嘴吹气垫使之尽可能膨胀到最坚硬;然后立即关闭阀门.
- Equipped with mechanical lift check feature to close valve the moment flow stops, preventing reverse flow. 配置机械提升式止回阀,当阀门出现流量停止时关闭阀门,防止倒流。
- Inflate the mattress by mouth as hard as possible, then quickly close the valve. 用嘴吹气垫使之尽可能膨胀到最坚硬;然后立即关闭阀门.
- Close valve C. Open valve A, then open valve B 1.2 turn, loosen hose at test cock #4 to remove air. Retighten hose. 关闭阀门C。开启阀门A,然后将阀门B开启1.;2圈,松开测试旋塞4号上的软管排出空气。重新紧固软管。