您要查找的是不是：
- pyrolysis heating rates 裂解升温速率
- The basic researches related to the technology, such as devolatilization characteristics of biomass at flash heating rate, the relation between pyrolysis conditions and product... 同时,探讨了该技术研究过程面临的基础研究内容,比如快速热解特性研究问题、热裂解条件与热裂解产物关系探索、生物油改性、生物油利用等问题。
- Ice might melt along the deep cracks, and the meltwater would substantially enhance the heating rate. 冰或许会沿著深入的裂缝开始融化，融化的水又会转而提升加热速率。
- In additional, influence of heating rate and particle diameter on combusting process is studied. 研究了升温速率、粒径对燃烧过程的影响,并计算出废轮胎燃烧动力学参数,获得其燃烧反应机理。
- The temperatures of peak in TG curves and DTG curves all increase with the adding of heating rate. 随着升温速率的提高TG曲线起始温度和DTG曲线峰值温度都逐渐提高。
- Microcalorimetry techniques are often required when performing calorimetric experiments with small sample sizes or slow heating rates. 在进行小尺寸样品或者慢加热速率的量热学实验时，常常需要使用微热量测量技术。
- Heating rate increases, the yields of NH3 and HCN decrease, while which of HNCO and NO increase. 升温速率提高，NH3及HCN的析出总量减少，但NO及HNCO的析出总量呈增加趋势；
- The effects of solid content and applied voltage on ohmic heating rate of soybean milk were also investigated. 实验证明：豆浆电导率随温度和固形物含量的增高而增大，且电导率与温度为线性关系；
- The dehydration of dihydrate gypsum was affected, besides atmosphere and heating rate. 二水石膏的脱水性能除受气氛的影响外，还受到加热速度的影响，随着加热速度的提高，二水石膏脱水的吸热峰出现的温度点推后。
- The relationship between thickness of MIM green parts and critical heating rate was studied. 研究了注射成形生坯厚度与缺陷产生的临界升温速度的关系。
- The endothermic peak of dihydrate gypsum dehydration was delayed with heating rate increasing. 化学石膏颗粒比较细，使得热峰产生的范围较窄，峰形趋于尖而窄。
- This paper studies the strength function of A3 steel affected by different heating rates when it was preloaded on the same value. 对一定拉伸预载下的A3钢试样进行了快速加热实验，研究了温升率对A3钢力学性能的影响。
- The peak temperature of the wood powder with higher MC was smaller with the same heating rate. 在相同升温速率条件下，含水率高的木粉出峰温度低，峰的终止温度低。
- Pressure, solvent flowrate and heating rate all have positive effects on extract formation rate(EFR), but work in different ways. 在所考察的范围内,压力、流量和升温速率的增大均可提高萃取物的生成速率。
- In order to study the devolatilization characteristics of pulverized corn stalk at fast heating rate,a laminar furnace was developed. 为了研究闪速加热条件下生物质的热解挥发特性,设计了等离子体加热高温层流炉作为实验设备。
- A series of sintering experiments with different heating rates are carried out in dilatometer for the alumina green parts shaped by powder injection molding and debinding. 摘要采用不同的升温速率，在膨胀计中对脱脂后的氧化铝粉末射成形坯件进行一系列的烧结试验。
- In order to study the devolatilizati on characteristics of biomass at fla sh heating rate,a laminar furnace was designed and built in our lab. 为研究闪速加热条件下生物质的热解挥发特性,设计了等离子体加热高温层流炉作为实验设备。
- It points out that the relation between optimal heating rate and coefficient of performance of a Carnot heat pump is useless. 指出了卡诺热泵的最佳泵热率与致热系数间的关系是没有实际意义的.
- But in the previous TSC experiments heating rate and some poling parameters are often changed such as polarization temperature, time and field intensity. 然而，传统的TSC法常用改变极化温度、时间、场强以及升温速率等参数来观察TSC谱的变化，并未在测量过程中引入新的作用参数，这使得TSC的应用有一些局限性。
- The parameters of heating rate, energy, current waveform and time should be controlled precisely in order to insure the quality of minisize piece spot welding. 摘要为了确保微型件点焊质量，往往需要对点焊过程的加热速度、能量、电流波形、时间等参数进行精密控制。
