您要查找的是不是：
- Notably, we proceeded a series of pure shear stress tests in order to isolate the influence of volumetric stress and shear stress to the volumetric behavior. 藉由一系列三轴试验之结果，希冀对木山层砂岩在遇水时力学行为之变化有进一步认知。
- Method of generating pure shear stress by adding boundary displacement and its application in back analysis for geostress field 施加边界位移产生纯剪应力及反分析应用
- pure shearing stress 纯切应力
- This verifies the equivalence of pure shear and simple shear. 这就证明了线剪切与简单剪刀的等价性。
- Critical resolved shear stress (O’crss). 临界分剪切应力。
- ECAP is an effective method realizing pure shear deformation. ECAP是实现材料纯剪切变形的有效方法。
- There is a diminishing difference in the shearing stress with rising pressure. 随着压力的升高，切应力的差值减
- The crushing process is carried out by pressure and shearing stress. 在相应的压力和切力作用下,物料得以破碎。
- The interfacial shear stress is a constant proportion of the bottom shear. 交界面的剪力与底部剪力之比是常数。
- The process does not affect the shear stresses. 这样的处理并不影响剪应力。
- The S-waves have the kinematics of pure shear waves,thus we can pick their first arrivals,calculate their interval velocities,and further compu. 实验发现：裂缝密度较高时，可以观测到明显的横波分裂现象；而裂缝密度较低时，仅能观测到微小的速度异常。
- According to the twin shear stress theory, this paper improves on Duncan Model. 根据双剪应力理论对邓肯模型进行了修正。
- Natural deformational zones are commonly the result of general shear, a combination of pure shear (coaxial contraction or extension) and simple shear. 天然变形带通常是一般剪切作用的产物，是纯剪切(共轴缩短或伸展)和简单剪切的组合。
- Tensile stress and shear stress are transferred by PBL shear connectors. 计算得到钠-混凝土接头的最不利荷载组合内力。
- A fluid is a substance that deforms continuously under an applied shear stress. 液体在剪应力作用下不断变形？？
- During extensional activities of Late Cretaceous to Eogene, intense upwelling of asthenosphere happened under the fault zone, leading to lithospheric necking in pure shear model. 断裂带在晚白垩世-早第三纪的伸展活动中,软流圈发生了强烈的上隆,岩石圈出现了显著的细颈化,属于纯剪切伸展模式。
- The main shear stress and its hydraulic system, calculation and research. 主要对其剪切力和液压系统进行计算和研究。
- Meanwhile, under both pure shear loading, the percentages of the sagittal and the transversal components are increased with the decrease of the sagittal angle. 前剪和后剪载荷条件下，关节突接触力的矢状和水平分力均随关节突矢状方向角度的减小而增大。
- Thus fluid shear stress has been considered one of the atherogenic factors. 在动物研究中还发现切应力与内皮细胞增生程度有关。
- The results show a certain time thermal cycle can cause the fracture mechanism change.It varies from original pure shear fracture to microvoid coalescence fracture gradually. 结果表明,一定时间的热循环会造成LF6铝合金焊接接头断裂机理的改变,由未经热循环时的纯剪切型断裂,逐渐过渡成微孔聚集型断裂。
