您要查找的是不是:
- pump pressure regulator 泵压调节器
- Closing time for pressure regulator. 调压阀出水口从全开到全关所需要的时间。
- BOOST PUMP PRESSURE INDICATION CIRCUIT. 增压泵压力指示电路。
- The pump pressure has increased. 泵压升高了。
- The pump pressure is fluctuating. 泵压不稳。
- The pump pressure is shown to be high. 泵压现在很高。
- NO. 2 TANK AFT PUMP PRESSURE SWITCH. 2号主油箱后增压泵压力电门。
- The pulley width and speed control is handled by a high/low pressure regulator. 滑轮的宽度和速度控制是通过高/低压力调整器来控制。
- A precision pressure regulator maintains the carrier-gas pressure constant. 精密压力调节器可以维持载汽压力恒定。
- Should the pump pressure fluctuate very often, what could be done? 万一泵压忽高忽低,应该怎么办?
- An experimental system of pressure regulator characteristic is introduced. 介绍了研究减压器特性的实验系统。
- A miniature plastic water pressure regulator shall be installed where indicated on the plans. 在计划指示的地方应该安装微型塑料水压力调节阀。
- The Watts Feed Water Pressure Regulator must be installed on the cold water supply line to the boiler. 美国瓦茨进水压力调节阀必须安装在通往锅炉的冷水供应管道上。
- The valve shall contain a Watts Regulator Model 9D backflow preventer and Model 1156 feed water pressure regulator. 这种阀门包含美国瓦茨调节阀型号9D防倒流阀和型号1156进水压力调节阀。
- The whole test cycle is automatedis pneumatically controlled by pressure regulator valves. 使用专用夹具,确保可以测量不同直径和高度的罐。
- Use this test in conjunction with the Fuel Pump Pressure Test and Fuel Pump Capacity Test. 与油泵压力测试和油泵容量测试一起进行该测试。
- As soon as the stroke per minute of the pump is adjusted, the pump pressure begins to change. 泵的每分钟冲数一调整,泵压就有变化。
- INSTALLATIONS BURNING COMMERCIAL BUTANE. PRESSURE REGULATOR TRIP, LOW-PRESSURE FIXED FLOW, FOR COMMERCIAL BUTANE FOR DOMESTIC USE. 商用丁烷容器装置。
- Pump: Segregate the pump and check how much the pump pressure can reach. Check the flux during the normal operation process. 泵:隔离出泵,查明泵压能达到多少。检查在正确的运行程序中的水流量。
- Select "with filling" at the main pressure regulation. 选择“物料”调节主压力。