您要查找的是不是：
- Install adjusting nut to the tensioner rod and adjust parking brakes. 将调整螺帽安装到拉伸器杆并调整手刹车。
- The pull rod is screwed into the inside thread of the anchor head. 将拉杆旋入锚头内的丝扣。
- Back off tensioner adjusting nut to create slack in cables. 旋下拉伸器调整螺帽使钢缆松弛。
- Mechanical mandrel, axially actuated via machine pull rod. 机械夹紧心轴;通过机床拉杆轴向操纵.
- Aileron servo pull rod should be vertical to the shaft of aileron basically. 副翼舵机拉杆应基本上垂直于副翼转动轴线。
- Below the fuselage----Make and Install Elevator pull rod and collet. 机身下面-升降舵拉杆及夹头的制作与安装。
- Raise vehicle and loosen adjusting nut at equalizer to provide slack in rear cables. 升起车辆并且放松均衡器的调节螺帽以使后钢索松弛。
- Install adjuster nut and lock nut. 安装调节器螺母和防松螺母。
- If there's still some clearance, slightly loosen the adjusting nut (for retraction of the boom). 如果还留有某些间隙,就稍微拧松调整螺母(对于起重臂缩回)。
- In order to improve the antivibration ability of PACKER inner pull rod, it is necessary to analyze its vibration characteristics. 摘要为了提高PACKER内拉杆的抗振能力，进行振动特性分析是十分必要的。
- The main products include: Pull rod case, travel bag, briefcase, computer bag, digital cameras and camera bagging, backpack, ice bag and so on. 主要产品包括：拉杆箱、旅行袋、公文包、电脑袋、数码相机及摄像机套袋、背包、冰袋等。
- Gradually and alternatively loosen the fastening nut and fasten the adjusting nut to eliminate nutation of the extending cable of the boom. 逐渐交替地拧松锁紧螺母,拧紧调整螺母以便减少起重臂外伸钢丝绳的下垂现象。
- Took down the spade pole lying above the drive, the spade opened the plank which stops up the door, enter, pull the pull rod, take the companion ladder to go down. 取下位于驱动装置上方的锹杆，锹开堵住门的木板，进入，拉动拉杆，乘坐升降梯下去。
- Use to unscrew Flame Adjuster Nut & Pump’s Stop Nut. ---用来旋松火焰调节器螺帽和泵的限位螺帽。
- Loosen parking brake cable adjustment nut until there is slack in front cable. 放松手刹车钢缆调整螺帽直到前钢缆松弛。
- The relationship of steel slippage to shear stress was obtained using a balance limit theory and a pull rod arch model.The loss in normal section bearing capacity as corrosion proceeds is predicted. 运用极限平衡理论和拉杆拱模型求出钢筋滑移量与剪应力的关系，从而建立了不同锈蚀程度的钢筋混凝土梁正截面承载力预计模型。
- hand brake drive rod adjusting fork 手制动器驱动杆调整叉
- Meanwhile, incorrect tie rod adjustment will lead to settlement, malposition or even collapse of crown. 不正确的拉条张力调整也将导致碹顶塌陷、下沉或错位，威胁其安全。
- spring seat bearing adjusting nut 弹簧座轴承调整螺母
