您要查找的是不是：
- production yield variance 产品收得率差异
- Animal growth or product yield is the ultimate concern of the agriculturalist. 牲畜的生长或其产品的生产量是农学家最关心的问题。
- The effect of catalyst, epichlorohydrin and base on product yield was studied. 研究了催化剂用量、反应原料配比及?A用量对产物收率的影响。
- The results indicate that the product yield of perchloric acid reaches 80%. 实验结果表明,可以得到产率80%25以上的高氯酸。
- Equipment - Should meet industry quality, maintenance, safety, changeover and production yield requirements. 设备-应该符合工业质量、维护、安全、转变和生产收益要求。
- Responsible for providing engeneering support to production to sustain and improve production yield, quality and process cycle time. 对生产部门提供各种必需的技术支持,运用系统的方法持续提高产品的良率和效率。
- The commonly used resin decoloration process is costly and has a lower production yield, which also generate a strong waste stream. 本研究试用超滤取代树脂脱色单元操作以克服其上述缺点。
- The flimsy-walled material has incured substaintial scraps and witnessed a product yield of only 3% so far. 由于原料壁薄，开始出现大量废品，到现在为止，合格率只为3%25。
- Based on retaining original hardware level,assembly accuracy and production yield can be improved by carrying out meticulous process. 在不提高硬件水平的基础上,通过实施精细化作业可提高装配精度,提高产品合格率。
- Setup and optimize the manufacturing process flow ，design jigs/fixture to optimize the assemble process and improve the production yield. 设定并优化产品制造流程，设计改进工装夹具以优化生产工艺，提高产品合格率.
- NMP has the advantages over phenol, such as throughput, product yield and quality, and energy consumption and enviromental protection as well. 该装置在加工能力、品收率、品质量、耗、保等主要技术经济指标上明显优于酚精制。
- Manufacturing process design output - Suppliers equipment should meet industry quality, maintenance, safety, changeover and production yield requirements. 制造过程设计输出-供应商设备应当符合工业质量,维护,安全,完全转变和生产投入产出要求。
- Review operations for potential defect causing items, and follow-up on any issues, so that there is a continuing focus to reduce defects and improve production yield. 努力减少产品缺陷提高生产良率,跟踪作业状况,消除潜在的缺陷因素;
- The reslts showed that the IMR are more efficient than the FBR. Propene selectivity of up to 57.4% and product yield of 22.1% were obtained in the IMR. 结果表明 ;IMR优于 FBR;IMR的丙烯选择性为57.;4%25;丙烯收率为 2 2
- Through rationally designing ingate /riser system and effectively using the lunkerite proportion, shrinkage hole and low production yield were eliminated effectively. 缩孔和钢水利用率偏低是目前精铸行业普遍存在和急需解决的问题。
- Test results showed that the decoking additive exhibited remarkable decoking and antifouling function, and the liquid product yield increased. 实验室评价结果表明：，所制备的抑焦剂具有显著的抗垢减焦增液作用。
- The influence of ammoniation reagent, catalyst, temperature mixing on the product yield was observed.The maxium yield of Nefidipine was 98%. 考察了氨化试剂，催化剂，温度对产物的影响，确定了最佳反应条件所得的尼群地平产率达到了98%25。
- The flux will play an important role in maintaining production yields. 焊剂在保持生产产出方面将起重要作用。
- With the mole ratio of p - toluic acid and uren to be 1: 1 .6 and sectionalization heated - shielded,the product yield is 75.6% . 当对甲苯甲酸与尿素的摩尔比为1：1．6，采用分段保温的加热方式，产品收率达75．6%25。
- NMP has the advantages over phenol,such as throughput,product yield and quality,and energy consumption and enviromental protection as well. 该装置在加工能力、产品收率、产品质量、能耗、环保等主要技术经济指标上明显优于酚精制。
