您要查找的是不是:
- The low temperature injection water will produce pressurized thermal shock(PTS) of RPV, so it is very importanrt to evaluate the intergrity of RPV under PTS. 这样,反应堆安注水与下降环腔内的流体将产生瞬间温度突变,导致压力容器壁面温度场重构,使容器壁受到混合物严重的热冲击,这一过程通常称为的承压热冲击(PTS)。
- Pressurized Thermal Shock Analysis for Reactor Pressure Vessel 反应堆压力容器承压热冲击分析
- Influence of Pressurized Thermal Shock on Nuclear Pressure Vessel 承压热冲击对核压力容器强度的影响
- Experimental tests and validation of calculation criteria of acceptable Tk shift with respect to PTS at VVER Pressurized Thermal Shock VVER 受压热冲击的试验测试和关于受压热冲击可接受
- pressurized thermal shock 承压热冲击
- Transient Mixing Characteristic of Reactor Pressure Vessel under Pressurized Thermal Shock 承压热冲击下反应堆压力容器中流体的瞬态混合特性
- High level of resistance to thermal shock and thermal fatigue. 优良的耐热冲击和抗龟裂能力。
- Won't get inferior quality after a recurring thermal shock test. 由冷热迴圈试验后;不会有劣化情形发生.
- Thermal shock to the components will need to be considered with this method. 采用这种方法时需考虑对元器件的热冲击。
- Thermal Shock Sensitivity of Dry Solid Film Lubricants, Methods of Test for (05. 干式固体薄膜润滑剂的热冲击敏感性的试验方法(05。
- Purpose: The equipment is used for mensurating thermal shock resistance of refractory products. 用途:用于测定耐火制品的抗热震性能。
- Excellent thermal shock resistance,thermal stability and thermal erosion resistance. 优良的抗热震性、热稳定性及抗热冲刷能力。
- Adhesive strength, hardness and the thermal shock resistance of spraying coating were tested. 测试了喷涂层的结合强度、硬度以及抗热震性能。
- The thermal shock resistance of ZS-2 sample with SiC 10% is better than that of ZS-1 with SiC 5% . 添加SiC10%25试样的抗热震性能优于含SiC 5%25试样的抗热震性能
- Toothache but not be haemorrhage, however tooth one cold of one thermal shock painful, how to do? 牙痛但不是出血,而是牙齿一冷一热冲击的痛,怎么办?
- CSZ manufactures environmental test chambers including temperature cycling, humidity, thermal shock, altitude. CSZ生产环境实验室,包括温度周期变化、湿度、热冲击、高度等。
- Because of the low expansion of fused quartz itself, the product possesses good thermal shock resistance. 同时由于熔融石英本身的低热膨胀性,使其具有优良的抗热震性。
- The crack formation of thermal shock fatigue is related to the nucleation, growth and join of microvoid. 热冲击疲劳裂纹的形成与微孔洞的形核、长大和连通有关。
- The formation mechanism of thermal shock fatigue crack of cemented carbide YG10 was investigated. 研究了YG10硬质合金热冲击疲劳裂纹的形成机制。
- Optional warm-up ports equalize fluid and motor temperatures, preventing thermal shock for dependable cold-weather operation. 可选的加温端口补偿流体或马达的温度,防止冷天运行的热膨胀冲击。