您要查找的是不是：
- Nowadays batch type equipments for large calcium carbonate,such as high speed kneader (mixer blender),grind machine and so on,are used as powder surface modification equipments. 目前,重质碳酸钙用粉体表面改性设备常用高速捏合机(混合机)等间歇式设备,质量不容易控制均匀,产品性能波动大。
- Preliminary Study on Magnesium Powder Surface Modification 镁粉表面改性的初步研究
- Study of Technology for Powder Surface Modification by Turbulent Air and Adsorption Mechanism of Silane Coupling Agent 气流湍流颗粒表面改性处理方法及改性剂吸附机理研究
- powder surface modification 粉体表面改性
- Study on the Surface Modification of Nanosized. 纳米二氧化钛表面改性的研究。
- According to the FTIR spectra, the modification process was efficient to coat a layer of stearic acid (SA) on the powder surface. 根据红外光谱分析，在粉末表面施覆硬脂酸或聚乙二醇可有效改变其表面官能基。
- Powder Engineering and its Surface Modification; -Water Treatment Technology; -Instrumental Analysis. 粉体工程及粉体表面修饰;-海水淡化及水处理技术;-仪器分析。
- Y. Q. Li, T. Qiu, J. Xu, and X. C. He, “Surface Modification of Aluminium Nitride Powder”, J. Mater. Sci. Lett.,15, 1758-1761, 1996. 陈惠军,“氮化铝粉体表面披覆无机物之抗湿处理技术”,成功大学硕士论文,民91年毕业。
- Surface modification of membrane was also investigated. 还进行了膜表面改性工作。
- The chemical surface modification conditions of aluminium hydroxide superfine powder fillers as well as the modification mechanism were studied. 研究了表面改性剂组成、用量、改性时间等对氢氧化铝超细粉体填料表面化学修饰效果的影响,并浅析了改性机理。
- Used stearic acid coaed nanometer ZnO powder, the process conditions of surface modification were discussed and find the best process conditions in this paper. 摘要用硬脂酸作改性剂，对其改性纳米氧化锌的工艺条件进行了研究，并给出了适合工业化生产的最佳工艺条件。
- The organic surface modification of tourmaline powder,an environment material,with sodium stearate as the modifica-tion agent was studied by mechano-activated method. 研究了机械力化学法对天然环境矿物电气石粉体进行的表面有机化改性。
- To gain the fine modification effect, the existing means of surface modification need to heat, to mechanical stir and to intermix the powder and the modifier. 为了获得良好的改性效果，现有粉体表面改性方法都需对粉体和改性剂进行加热和机械搅拌、混合。
- Used stearic acid coaed nanometer ZnO powder,the process conditions of surface modification were discussed and find the best process conditions in this paper. 用硬脂酸作改性剂,对其改性纳米氧化锌的工艺条件进行了研究,并给出了适合工业化生产的最佳工艺条件。
- Ion beam induced surface modification of polymer was extensively discussed. 介绍了运用高能离子束对聚合物材料进行表面改性的新工艺。
- The surface modification makes no obvious difference in depurated efficiency. 表面改性对净化效率没有明显影响；
- MAH was grafted on PP powder surface by solid phase graft copolymerization with BPO and DCP as initiators. 以过氧化苯甲酰（BPO）、过氧化二异丙苯（DCP）为引发剂，用固相接枝法在聚丙烯（PP）粉表面接枝马来酸酐（MAH）。
- During Service, if the Lanthanon aluminates luminescent powder surface contacts and does relative movement with metal, it will be nigrescent. 摘要稀土铝酸盐发光材料在使用过程中和金属铁接触并发生相对运动则会出现色泽变暗现象，影响其产品外观及发光亮度。
- Keywords: TiAl intermetallics, high temperature oxidation resistance, surface modification. 关键词：钛铝介金属、高温氧化抵抗、表面改质。
- The results showed that stearic acid could reduce the powder surface energy obviously and disperse the abrasive and solid finely. 研究发现，十八酸能显著降低粉体材料的表面能，粉碎性能优良，固体分散性较好；
- 今日热词
-
- 深远海浮式风电平台 - deep-sea floating wind power platform
-
- 京雄高速公路 - Beijing-Xiongan expressway
-
- 农业及相关产业增加值 - the added value of agriculture and related industries
