您要查找的是不是：
- powder dip coating process [化] 粉末浸涂法
- TiO_2 nano thin film was prepared on ITO glass substrate by dip coating and spin coating process. 以TiCl_4和C_(16)H_(36)O_4Ti溶胶为前驱体,分别采用旋转-涂覆法和浸渍-提拉法制备了纳米TiO_2薄膜。
- With carbon steel pretreated with flux, hot dip coating process and bimetal producing of ZAS35 alloy/carbon steel as well as bimetal interface characteristic were studied. 研究了经熔剂法预处理的碳钢热浸镀ZAS35锌合金工艺、ZAS35锌合金 /碳钢双金属制作工艺及双金属界面特性。
- The TiO_2 nano thin film prepared by spin coating process is white, while the TiO_2 nano thin film made by dip coating process is colorless and transparent. 以TICl_4为通过旋转.;涂覆法制备的纳米TiO_2薄膜;表观为白色不透明膜;而以C_(16)H_(36)O_4Ti为前驱体选用浸渍-提拉法制备的薄膜为无色透明膜。
- The preparation of WO 3 thin films has been reported using a sol gel process together with the dip coating method, and tungsten powder being the raw material. 以金属 W粉为无机原料 ,溶胶 -凝胶技术结合浸渍镀膜方法制备出 WO3 薄膜 ,借助 SEM、可见光分光光度计、椭偏仪等仪器测量了薄膜的特性。
- powder dip coating 粉末浸涂法
- dip coating process [化] 浸涂法
- [Abstract] With carbon steel pretreated with flux, hot dip coating process and bimetal producing of ZAS35 alloy/carbon steel as well as bimetal interface characteristic were studied. [摘 要] 研究了经熔剂法预处理的碳钢热浸镀ZAS35锌合金工艺、ZAS35锌合金/碳钢双金属制作工艺及双金属界面特性。
- A metallurgical coating process in which iron or steel is immersed in a powder of another metal, such as zinc, chromium, or aluminum, and heated to a temperature below the melting point of either. 渗碳处理一种冶金镀膜工序，在此工序中把钢或铁浸入另一种金属如锌、铬或铝的粉剂里，并加热至这一金属的熔点温度以下
- Pure and Pt doped ( m( Pt ):m( WO 3)=0.3%) WO 3 thin films were prepared using the sol gel process by the dip coating technique on alumina substrates. 用溶胶凝胶浸渍技术在三氧化二铝基片上制备了纯和 (m(Pt) :m(WO3 ) =0 .;3%25 )铂搀杂的三氧化钨膜
- The preparation of nano porous tungsten oxide films has been reported using a sol-gel process with the starting tungsten powders together with the dip coating method. 以金属W粉为无机原料 ;采用溶胶 -凝胶技术 ;结合浸渍镀膜方法 ;制备出纳米多孔WO3薄膜 ;研究了热处理对薄膜性能的影响 .
- The preparation, coating process and application prospect of the UV curable powder paint are introduced. 介绍了紫外光固化粉末涂料的制备、涂装工艺及应用前景。
- The porous TiO 2 anatase nanometer thin films were prepared from titania powder by ultrasonic wave and dip coating technique. Its photo electrocatalytic performance for the oxidation of methanol was investigated. TiCl4为原料采用常压沸腾回流工艺合成的纳米TiO2 粉体 ,经超声分散成溶胶后 ,用浸渍提拉的方法将TiO2 固定在导电玻璃上制成多孔纳米薄膜光电复合催化剂 ,并就该催化剂对甲醇的光电复合催化氧化性能进行了研究。
- Compile and develop SSEAC/ STS assembly/ coating process. 制订和完善SSEAC/TS总装/塑生产工艺流程。
- Lu:su caps, vacuum coating processing. 铝塑瓶盖、真空镀膜加工。
- Dip coating: Coating method in which the web is passed around a roller immersed in solution. 浸渍涂布:纸卷绕过一浸于涂面溶液的轴而加上涂层的方法。
- PVA coated gloves for solvent resistance were obtained through dip coating. 用浸渍涂膜技术成功制备了一种耐有机溶剂的PVA涂膜手套。
- The coating process affecting the radiating capacity of chaff is analyzed. 涂敷稠度相同的烟火药,涂层厚的箔片辐射强度偏高。
- The article introduced the principle, process, equipment, raw meterials and product performance of powder dipping on isolated barrier of highway, and predicted its promising future. 介绍了高速公路隔离栅粉末浸塑的原理、工艺、设备、原料及产品性能,展望了发展前景。
- Main factors of influencing photoresist thickness for dip coating is analysed in this paper. 分析了提拉法涂胶中影响胶膜厚度的主要因素，并据此确定出胶膜厚度；
