您要查找的是不是:
- RPIC Radio Port Interface Card 无线端口接口卡
- port interface card 端口接口插件
- Provide the network interface card (NIC) number followed by a port number in the Via Parameters box. 在“VIA参数”框中,提供网络接口卡(NIC)编号,后跟端口号。
- Test using the IP address of your computer network interface card. 请使用您的计算机网络接口卡的IP地址进行测试。
- Because, it needs to manufacture the interface card, the cost will be high. 由于需要制作适配卡,所以成本高昂。
- Parallel port interface is a horrid kluge asking for trouble, and USB drives are slow. 并口接口是一种会给您添麻烦的棘手玩意儿,而USB驱动器则很慢。
- It could be that your Network Interface Card provides TFTP boot functionality. 您的网卡很有可能提供了TFTP引导功能。
- The CONTROL SYSTEM also provides an ETHERNET port interface further to the factory manage level in future. 本系统为工厂管理级预留以太网接口。
- If cabling is correct, power off the device and reseat the interface card. 假如缆线连接是正确的,关掉设备且重新插入介面卡。
- The host port interface(HPI) are an 8-bit parallel port used to interface a host processor or device to the Texas Instruments(TI) digital signal processor(DSP). HPI是TI公司数字信号处理器(DSP)中用于和主机进行双向数据通信的8位并行接口,HPI使DSP与主机接口电路简单,不需要附加外部的接口逻辑。
- Network interface cards currently range from $500 to $2,000,and an FDDI hub can cost anywhere from $450 to $2,000 per port. 目前网卡的价格为500-2000美元,FDDI集线器每个端口可能高达450-2000美元。
- Parallel port interfacing a complete source code can be used directly. (译):并行端口接口的完整的源代码可以直接使用。
- Network interface cards currently range from $500 to $2,000, and an FDDI hub can cost anywhere from $450 to $2,000 per port. 目前网卡的价格为500-2000美元,fddi集线器每个端口可能高达450-2000美元。
- For best performance, use a dedicated network interface card (NIC) for mirroring. 为获得最佳性能,请为镜像使用专用网络接口卡(NIC)。
- A PC with CAN interface card is connected to an OMRON's DeviceNet master to form a design and debugging environment. 在PC机上插入一块控制局域网(CAN)适配卡并与OMRON的DeviceNet主站连接组成DeviceNet的调试环境。
- The paper also introduces stepper motor,IPC5375 interface card and Labwindows/CVI. 介绍了一种利用工控机和IPC5375接口卡,对步进电机实现高精度定位和速度控制的方案。
- This paper makes a comparison among the following methods: DMA, Global Memory and Host Port Interface (HPI) and illustrates the hardware structure and software programming of HPI by an example of TMS320C54x, the typical chip of Texas Instrument. 下文比较了数据交换所采用的各种技术 ,包括 DMA、全局存储器和 HPI( Host portinterface) ,并通过 TI( Texas Instrument)的典型芯片TMS3 2 0 C5 4 x着重讨论了 HPI接口的硬件结构与软件编程。
- In this thesis we develope a DSP interface card, with subroutines and application examples. 中 文 摘 要本文以数位讯号处理微电脑介面板之设计, 实作与应用为主, 除介绍硬体电路外并提供相关介面函式及范例以供参考使用。
- A serial port interface can be used to take control of the power supply, to set G1, G2 and G3 voltages, to select the XRII field, or to measure back the real electrode voltages(see chapter4). 一个串行端口接点可被用来控制电源,设定G1,G2和G3电压,选择X线影像增强器视野,或延迟测量实际极间电压(看第4章)。
- A simple method to realize a GPIB controller Is to connect a GPIB interface card to a PC in which driver and OS are required. GPIB控制机的最简单的实现方法是在一台PC机上挂接一个GPIB控制器,并辅以相应的驱动软件和控制软件。 GPIB控制器必须要有联结PC机的接口。