您要查找的是不是：
- The subsystems such as adsorbent bed, condenser, evaporator of plate solar ice-maker have been analyzedand designed. 对太阳能固体吸附式制冰机系统的关键零部件吸附床、冷凝器、蒸发器加以分析，并进行了实物设计。
- Both sensible heat and adsorption heat of adsorbent bed can be recovered efficiently and easily. 该装置能有效地回收太阳固体吸附式制冷循环中吸附床的显热及吸附热 ,且操作简便。
- Jansson, H., and Palm, B., ”Thermal and Hydraulic Behavior of Plate Fin and Strip Fin Heat Sinks Under Varying Bypass Conditions”, The Sixth Intersociety Conference on, 1998. 李雅雄，笔记型电脑散热系统之主动式热沉最佳化设计，交通大学机械工程系硕士论文，2001年。
- Heat transfer enhancement of adsorbent bed is the primary factor to affect solid adsorption refrigeration. 吸附床的传热强化是影响固体吸附式制冷的主要因素。
- The heat transfer performance of plate fin and staggered heat sink is comprehensively analyzed by the use of quality factor "F" which is a non-dimensional variable. 本文引用无量纲品质因数F,分别对平板和叉排散热器的换热性能进行了综合分析。
- The results of both theory and experiment showed that the CPC reflector can raise the temperature of adsorbent bed and increase the desorption capacity highly. 理论与实验结果表明,CPC反光板与该太阳能冷管结合,可以提高吸附床温度,增加脱附量。
- The model and results are helpful to reveal heat and mass transfer characters of the adsorbent bed and to provide theoretical basis for optimal design of this system. 该数学模型和计算结果有助于深入认识吸附床的传热传质特性，以期能为吸附床的具体设计提供理论依据。
- The effects of heat and mass transfer coefficients on the temperature of adsorb bed and effluent concentration were analyzed comparing by experiment. 讨论了传热与传质系数对吸附床层温度和流出浓度曲线的影响, 并与实验进行了对比分析。
- A more realistic mathematical model, which accounts on the non-isothermal effects in the adsorb bed, was developed for the pressure swing adsorption of separating oxygen from air. 建立了变压吸附空分制氧过程非线性、非等温模型，并进行了数值模拟，计算结果与实测值吻合较好。
- The mathematical model in this paper is more integral and accurate in describingthe performance of heat and mass transfer in the adsorbent bed than the traditional mathematical model. 所建立的数学模型较之现有的吸附床传热传质数学模型能更全面、准确的描述吸附床的传热传质特性。
- Plate finned tube bundles of heat exchangers are generally in staggered and seldom in aligned arrangement. 套片式换热器的管束排列形式一般都是叉排,顺排非常少见。
- The change of the pressure in adsorbent beds and brine temperature was obtained experimentally. 对实验过程中床内压力、盐水温度的动态变化进行了分析；
- Thermal-characteristic analysis of the plate fin heat sink 型材散热器热特性分析
- This study indicates that small adsorbent beds composed of small particles with high capacity provide the best performance. 本文阐述了小颗粒、高容量性能的吸着剂填装的小的吸附床层具有最好的分析效率。
- Study of fin edge shape of plate fin heat sink in forced convection cooling 强制风冷板翅式散热器肋片边缘形状的研究
- A feather, wing, fin, or similar appendage. 羽、翼或鳍状结构羽、翼、鳍或类似的悬着物
- A dynamic simulation model of heat and mass transfer of adsorber bed and heat/cooling fluid is presented. 摘要针对吸附床及其换热流体建立了传热传质耦合的动态模型，并对该模型进行了数值求解，得出了吸附剂的温度场；
- The shark's fin sliced the water. 鲨鱼的背鳍像刀样迅速划破水面。
- He only put a bit on his plate to make fashion. 他只是拨了一点食物到盘子里做做样子。
- DESIGN OF A NEW COMBINED FLAT PLATE SOLAR ADSORBENT BED ABOUT SOLIDADSORPTION REFRIGERATION 一种新型的平板式太阳能制冷吸附器复合体设计
