您要查找的是不是：
- Good bonds are always accompanied by surface extension, that is, plastic shear strain. 良好的键合总伴有表面延伸即塑性切向形变。
- Non-uniform shear dilatancy of rock specimen due to plastic shear strain localization is analyzed considering strain gradient effect. 摘要采用梯度塑性理论，对岩样剪应变局部化引起的扩容进行了理论分析。
- The microstructure, the shear strain and the micro-hardness around the sheared surface by plastic shearing of red copper bar under axial load were examined, and the sheared surfaces were observed by SEM. 研究了轴向压力作用下紫铜棒料塑性剪切分离面附近的微观组织形态、剪应变和硬度分布以及剪切分离面形貌。
- The model of plastic shear strain gradient on size effect in uniaxial compression of rock specimen 岩石试件尺寸效应的塑性剪切应变梯度模型
- plastic shear strain 塑性剪应变
- local plastic shear strain 局部塑性剪切应变
- The shear strain can be determined in the following way. 用下列方法能够确定切应变。
- Shear strain in MBE grown CdTe films on Si(211) substrates[J]. 引用该论文 王元樟;陈路;巫艳;吴俊;于梅芳;方维政;何力.
- The transformation is due to the shear strain imposed on the specimen by ECAP. 该转变发生是由于ECAP过程中材料承受剪切应变,应变能累积诱发再结晶,从而形成等轴晶双相结构。
- The only strain is a shear strain and the dilatation is zero, these waves are called shear waves. 唯一的应变是剪应变而没有膨胀，这种波叫剪切波。
- The findings show that,in course of serrated chip forming,the deforming material went through the both deforming stages of the plastic shear deformation and the local shear slip. 研究结果表明,在锯齿形切屑的形成过程中,变形材料经历了塑性剪切变形和集中剪切滑移两个变形过程。
- Variation of Damping Properties Under Magnetic Field and Shear Strain Amplitude in Fe-Cr-Al Alloys. 高阻尼Fe-Cr-Al合金在磁场和应力场下的阻尼行为
- The elasticity of copolyester increases with the shear strain but decreases with the temperature. 弹性随切应力的增大而增大,随温度的升高而降低。
- The residual strain is the additional shear strain created with the increase of pore pressure due to cyclic shear under initial shear stress. 残余应变是由于周期剪切引起孔隙压力增长;在初始剪力作用下产生的附加的剪应变.
- The results show that the data of shear strain 2 are reliable because the component 2 and 4 of shear strainmeter work normally. 通过对标定系数和滞后时间的分析认为：元件2、4工作状况比较稳定，观测值差应变2是比较可靠的；
- In this paper,the principle of interaction between plastic volumetric and shear strains for rock and soil has been extended to the field of unsaturated soils. 将岩土塑性体应变与剪应变的相互作用原理拓展到了非饱和土领域。
- Moreover, high value region of maximum shear strain and superficial expansion in this area is in Tianjing, Beijing, Tangshan area. 区内最大剪应变、面膨胀的高值区在天津、北京、唐山一带。
- Showed that by a special choice of initial axes, the mathematical impact of shear strain rate is removed, and only dialation and rigid rotation remain. 藉由选择特殊的起始轴，显示当去掉剪切应变速率，仅保留扭曲和刚性旋转的数学上的影响。
- Furthermore,a new simplified elastic method called as inherent shear strain method is developed for forecasting fillet weld's angular distortion. 在此基础上,进一步提出了一种用于预测角焊缝角变形的线弹性简化方法,即剪切固有应变法。
- Derived results are able to reflect the influence of the quality of a material to them,compared with the result from the shear strain energy strength theory. 导出的结果与由剪切应变能强度理论得来的结果相比,能够反映材质的不同对疲劳极限条件的影响。
