您要查找的是不是：
- plastic yield value 塑流值,塑性屈服值
- A tension member may fail by plastic yielding. 拉伸元件可能由于塑性屈伏而破坏。
- The collapse load was investigated through the plastic yield and crack steady propagation criterions. 基于塑性屈服和裂纹稳态扩展准则求得结构的极限载荷；
- The rheological property of emulsion was non Newtonian fluid and the yield value of emulsion was 587 dyne/cm 2. 流变学研究表明乳剂属于非牛顿流体 ,屈服值为 587dyne/ cm2 。
- It was shown that the best rheological property of the coatings for EPC is pseudoplastic fluid which have a certain yield value and slight thixotropy. 试验得出，涂料流型以有一定屈服值和较小触变性的假塑性流体为佳。
- It was shown that the yield value of colloidal silica sol slurry was increased and its suspensibility was improved by adding some additives. 试验结果表明,加入添加剂可提高硅溶胶涂料的屈服值,改善涂料的悬浮性;
- The analytical results show that plastic yield occurs in the tip of V-shaped notch of 45 steel bar,20 steel bar and 60Si2Mn bar under the condition of given parameters,but the heat crack only appears in the tip point of V-shaped notch of 60Si2Mn bar. 研究结果表明,对于45%23钢、20%23钢、60Si2Mn棒料来说,在现有给定的参数下,其V型槽尖端均发生了塑性变形,但只有60Si2Mn棒料在其V型槽尖端点产生了热裂纹。
- The results show that the content of B can be increased by purification,the surface acidity of boron reduces and the apparent viscidity and yield value of B/HTPB mixture increase slowly with the increase of mixing time. 结果表明,硼粉的提纯处理使硼元素含量小幅度增加,硼粉表面酸性降低,B/HTPB混合物的屈服值和表观黏度增长减缓。
- The stress and strain on low dip angle clay gouged intercalation D5 is close to yield value within local parts at the intersecting curtains and is in the state of elasticity on discontinuities D7, D6, f7, F4, p60, F2, F10 and in curtains. 坝基内倾向下游的缓倾角泥化夹层D_5结构面的应力、应变在帷幕相交处局部区域接近屈服，D_7、D_6、f_7、F_4、F_(60)、F_2、F_(10)等结构面及帷幕的应力、应变均处于弹性状态
- Increase of Al??3+?/clay ratio reduces considerably the viscosity and the Bingham yield value in concentrated suspensions and the particles aggregate to form a complex FF,EF,and EE flocculent structure. 聚合羟基铝离子的加入对累托石悬浮液中颗粒的絮凝有明显的促进作用，在浓的累托石悬浮液中形成了FF，EF，以及EE混合缔合结构。
- We will never yield to invaders. 我们绝不会向侵略者屈服。
- The actual shape of the dot may be peaky-conical, associated with very high yield values, or rounded hemispherical, associated with lower yield values. 若贴片胶屈服值较大，则相应的胶点呈现尖峰状外型，相反，若屈服值较低，胶点则呈现半球状外型。
- The results indicate that the treated soybean protein fiber and the blend have higher LOI and char yield values,lower T_e,smaller ... 结果表明,与未经阻燃处理的纤维相比,阻燃处理后的纤维在物理力学性能没有减弱的情况下,极限氧指数和剩炭率提高,阻燃性能明显改进。
- Says Synnott, "It forced us to ensure that every decision we made yielded value and success for us, even if it was the harder decision. 布兰登说，“这迫使我们认真对待每个决策，力求每个决策都能产生收益，为我们带来成功，即使这意味着要选择一条更难走的路。”
- Comparison of yield stress among several plastic yield criterions 几种屈服准则的屈服应力的比较分析
- The effect of Poisson ratio of material properties on plastic yield 材料泊松比对塑性屈服的影响
- The man is carrying a small black plastic handbag. 这个人提着一个黑色的小塑料提袋。
- He is a plastic surgery specialist. 他是个整形外科医生。
- Many items in daily use are made out of plastic. 有很多日常生活用品是塑料制的。
- It is some kind of plastic made to imitate iron. 这是一种塑胶，但外观仿制得像铁。
