您要查找的是不是：
- Design of Injection Mold for the Plastic Tube Junction Box 塑管接线盒注射模设计
- plastic tube junction box 塑管接线盒
- Height Floor to Junction Box mm. 高度接线盒高度。
- Screw the standard rail up in the junction box. 将标准导轨用螺钉紧固在接线盒上；
- A plastic tube connects the monitor and the cuff. 塑胶管连接显示器及袖口。
- CZ-JB junction box is produced with Bao Steel A3 material with surface finish of paining and plastic spray. JB接线箱采用宝钢产A3板材进行加工生产，表面处理烤漆、喷塑。
- Technology: tetrafluoroethane by ordinary heating regardless of the heating of the outer casing and tetrafluoroethylene in the terminal plastic junction box is processed. 它是由普通加热管的外层加四氟套管，在接线端用塑料接线盒加工而成。
- The plastic tube is inserted into the hole cut with scissors. 这个塑料管被插进了剪刀剪出的洞里。
- The new winter ventilation system consisted of a perforated plastic tube. 新的冬季通风系统由带孔的塑料管组成。
- It is same to TC & RTD products，otherwise the junction box have some change. 除接线盒结构有改动外，其它与热电偶或热电阻产品一样。
- The new winter ventilation system consisted of a perforated plastic tube . 新的冬季通风系统由带孔的塑料管组成。
- All dies should have a quick disconnect junction box for easy hook up to the die protection control. 所有的模具应该有一个很容易连接模具保护装置的快速切断盒。
- CZ-JB junction box produced with Bao Steel A3 material with painting after surface finish. JB接线箱采用宝钢产A3板材进行加工生产，表面加工处理后喷漆。
- Remove junction box cover that is secured by 3 screws. Place the cover aside and view the wiring diagram on the inside. 通过旋下3个螺丝来拆卸接线盒。把盖子放在旁边并察看内面的接线图。
- The IOP was measured with a sphygmomanometer that was connected with a plastic tube inserted into the anterior chamber. 使用台式血压计，前房穿刺插入导管直接测量前房灌注过程中的眼内压；
- AH seriesflame-proof junction box code, outline and descriptions as the following table. 系列隔爆型接线盒代号,外形及名称一览表。
- PRD ： Design、Printing &Manufacture for Plastic Tube Use for Food、Drug &Cosmetic、ALU-ALU(Cold Formable Foil)、P.T. 食品、药品、化妆品用塑胶软管、设计、印刷、制造、ALU-ALU冷压成型式铝箔、P.
- He's buried something in a junction box out there and covered it with dirt-- I saw him. 他在外面的接线盒里埋了些东西然后用土盖住我都看见了。
- Situation:Old level sensor versions with a plastic tube are being received by the defective parts inspection team. 情形：装有一个塑料胶管的，旧版本的冷却液液位传感器被专门检查有缺陷零部件的专家组认为是符合标准的。
- Loosen the screw holding the junction box cover to the top of the water heater. Set the cover aside. 卸下热水器顶部接线盒盖上的固定螺丝。把盖子放在旁边。
