您要查找的是不是:
- Type Y3-H**J1 relief valve act as pilot valve in control of cartridge valve or remote relief valve. J1做为逻辑插板阀的先导调压阀或远程调压阀使用.
- Remove the elbows from the relief valve base. 从安全阀底座拆卸弯头。
- Clean or replace the relief valve seat. 清洗或更换安全阀阀座。
- Damage or fouled relief valve seat. 安全阀阀座损坏或受到污染。
- Damaged or fouled relief valve seat. 安全阀阀座受到损坏或污染。
- Relief valve must be piped to a suitable drain. 安全阀必须配置通向适当排泄口的排泄管道。
- Install relief valve cover nut and tighten. 安装安全阀阀盖螺母,并加以紧固。
- The design proposal of the pilot operated safety valve localization production was studied based on the former modular analysis for the nuclear auxiliary system such as RRA and RCV. 根据模块化设计方法,提出了核辅助系统的先导式安全阀国产化设计方案。
- The basic concept of modular design was introduced in this paper.The modular construction of pressurizer pilot operated safety valve was analyzed and divided into several independed modules. 本文阐述了模块化设计的基本概念,并对稳压器先导式安全阀进行了模块分析和模块划分。
- To assemble the Relief Valve Assembly have a screwdriver ready. 准备好组装安全阀总成的螺丝刀。
- Place the relief valve seat back into the chamber bore. 将安全阀阀座放回到镗孔内。
- Pilot operated valves shall be considered for back pressures greater than 40% of set pressure if more favourable de-rating factors result in a valve smaller than a bellows type. 如果更多有利的非测定因子导致阀门小于波纹管类型的,对于背压大于设定压力的40%25的,应考虑辅助操作阀。
- Remove the relief valve hose from fitting below inlet ball valve. 从进口球阀下面连接件拆卸安全阀软管。
- The structure characteristics and operation principium of new type pilot operated all open safety valve under low pressure and vibration working conditions are introduced. 介绍一种在超低压和振动条件下工作的先导式全启安全阀的结构特点及工作原理。
- Slide the diaphragm assembly into the relief valve seat. 将隔膜总成滑进到安全阀阀座内。
- The ARGOS pilot operated regulator is the newest product in a series of regulators that have been developed by the Engineering Department of GasCat. ARGOS指挥器操作调压阀为盖司凯特工业之工程部门研发一系列减压器中最新的成果。
- No valve is to be placed between the relief valve and tank. 在热水器储水罐和安全阀之间不需要安装任何阀门。
- Electrolysis of relief valve seat or first check seats. 安全阀阀座或第一止回阀阀座被电解或电蚀。
- Electrolysis or relief valve seat or first check seats. 安全阀阀座或第一止回阀阀座产生电蚀。
- Must not be smaller than the pipe size of the relief valve. 不能小于安全阀通径。