您要查找的是不是:
- The ratio of the thermoplastic polymer to oven dried wood flour based on weight was 1:1. 对烤箱的热后可朔性的聚合体的比弄干被基于重量的木材面粉是 1:1 。
- Father put some dry wood on the hearthstone. 父亲将一些乾材放到壁炉底石上。
- This visualizes that from oven dry upto 10% MC, the influence of MC on air permeabilities of wood chip bed is very significant. 当含水率从绝干增至10%25时,木片料床的透气率急剧减小,说明木片从绝干至含水率略有升高时,含水率对木片料床透气率的影响极为显著。
- The dry wood blazed up at the touch of a match. 干柴用火柴一点就燃烧起来。
- The dry wood kindled up quickly. 干燥的木头很快地烧起来。
- The sparks kindled the dry wood. 星火燃着了干木。
- Without love, man is like dry wood. 没有爱,人就像是枯干的树木。
- The dry wood blazed up at the touch of a match . 干柴用火柴一点就燃烧起来。
- The spark kindled the dry wood . 星火燃着干柴。
- He took the glass and focused the sun on some dried wood. 他拿出透镜,然后把太阳光聚焦在一些干木材上。
- One way to get a lot of smoke is to use green wood, not dried wood. 获得很多烟的一个方法就是使用绿色木材,而不用干的木材。
- The line is being designed for a daily capacity of 725 odt (oven dry metric ton) of fully bleached pulp. 该生产线目前正在设计能力每日725片(绝干吨)的全漂白木浆。
- Dry wood burns easily. 干柴容易燃烧。
- For the oven dry sediment,the adsorbed amount of NCB can reach 71%-82% for the sediment under 100 g/L sediment concentration. 腐殖质吸附量占总吸附量的18%25~29%25。
- Dry wood makes a good blaze. 乾木燃起夺目的火焰。
- Method:To determine the moisture content by oven drying method and salinity by argentimetry of market scorpion. 方法:用烘干法测定全蝎含水量和银量法测定全蝎含盐量。
- METHODS: Vacuum freeze drying and oven drying were adopted.The content of gastrodin was determined by RP-HPLC. 方法:采用RP-HPLC法测定真空冷冻干燥法和传统的水煮烘干法加工后的天麻中的天麻素的含量,并比较两者的外观特征。
- If you focus the sun's rays on dry wood with a burning-glass, it will start burning. 如果你用取火镜使太阳光线聚焦在干木头上,木头就会燃烧起来。
- The influence of oven drying and air drying was compared,and the gels variation of pectin which was conserved for different periods was measured. 研究了不同时期的苹果渣内果胶含量、果胶提取率及其它的指标的变化。
- Solution Temperature: (20-35 c) . Immerse the parts in the solution for 1-2 minutes. Take it out and shake it manually slightly or in a centrifuge. Let it dry in the air. Oven dry at 80-100 c for 20-30 minutes is preferred. 溶液温度20-35℃。零件在溶液里浸泡1-2分钟。出液后稍做抖动或用离心机甩干,再常温晾干,或80-100烘20-30分钟效果更佳