您要查找的是不是：
- output end face 输出端面
- Metope, end face, window make gout change. 墙面、顶面、窗户等做趣味变化。
- Basically use at material of condole end face. 主要用于吊顶面材。
- Delivery: The output end of a pres, or bindery equipment, where the product emerges. 收纸部份:印刷机或装订设备的输出部份，产品在这里送出。
- Lubricationhole is in the end face at theribbed end of the tsud only. 油孔公在螺栓挡边端端面上。
- Delivery The output end of a pres, or bindery equipment, where the product emerges. 收纸部份印刷机或装订设备的输出部份,产品在这里送出。
- It is spread on end face of extruded shim to make shim separate with discard. 涂于挤压垫片端面，使垫片与压余分离。
- The smoothness of that shaft 's end face reaches the required criteria. 某轴体的端面其平坦度符合应达到的标准.
- Side this company common playbill and the big chart output end product contains Leng Biaoji to cut not seperately increases price. 本公司一般海报及大图输出成品均含冷裱及裁边不另外加价。
- In the experiment,the two laser beams of different wavelengths,which are separated at the output end of demultiplexer, are observed successfully. 实验中成功地观察到同光纤传输的两个不同波长的激光信号在波分器的输出端分离。
- The temporal temperature of nonel tube flame at its output end were determined by two method: modified sodium line reversal method and two-line spectroscopy method. 用改进型钠谱翻转法和原子发射光谱双谱线法两种测温方法对导爆管输出火焰的温度进行了测定。
- With the face grinding attachment, perpendicularity of the end face to the bore after grinding can guaranteed. 带有端磨装置，保证工件端面与孔的垂直度。
- Based on the principle of virtual displacement, the mapping relation between the original error of a planar mechanism and its output end pose error is analyzed. 利用虚位移原理，讨论了平面机构原始误差与输出端位姿误差间的映射关系;
- The penstock chooses end face integral seal and the seal material is special rubber, which makes the seal safety and durable. 闸门采用端面整体密封，密封材料采用特殊橡胶材料，保证密封牢靠、耐用。
- This hexahedral included end face, all around establish face and underside 6 place. 这个六面体包括了顶面、四面的立面和底面六个部位。
- This special fixture can be used to machine inner bore,excircle,and end face,and also can be repeatedly used. 该夹具可完成内孔、外圆、端面的加工,还可重复使用。
- It is spread on end face of extruded shim to make shim separate with discard. 3. 2、涂于挤压垫片端面，使垫片与压余分离。
- This hexahedral included end face, all around establish 6 position such as face and underside. 这个六面体包括了顶面、四面的立面和底面等六个部位。
- After technology improvement, the used material reduces, and the crack, shrinkage cavity of end face and puckering don't exist in the furcation part. 工艺改进后，材料减少，原来存在的裂纹、缩口以及接头处参差不齐的问题得到彻底地解决。
- Tonal and main be to pass the ground, metope, end face to reflect, and adornment, furniture rise only adjust, additional action. 色调主要是通过地面、墙面、顶面来体现的，而装饰品、家具等只起调剂、补充的作用。
