您要查找的是不是：
- oil pump shaft guide 油泵轴导管
- The results were showed that the noneffective heat treatment,large inclusion and keyway without R angle caused the fracture of main oil pump shaft. 结果表明,泵轴未经有效的热处理、边缘存在较大的夹杂物以及键槽未加工R角是导致泵轴断裂的主要原因。
- Main oil pump shaft 主油泵轴
- oil pump shaft 油泵轴
- oil pump shaft gear 油泵轴齿轮
- Taian Wuzhou Oil Pump And Oil Nozzle Co., Ltd. 泰安五洲油泵油嘴有限公司。
- Excavation for fuel oil pump house is in progress. 燃油泵房开挖工作正在进行。
- Activates the auxiliary oil pump. 辅助油泵激活按钮。
- And then removed the pump shaft shell removed send impeller repair shop repair. 然后将轴拆出泵壳，拆下叶轮送修理厂修理。
- Positive displacement main oil pump, mounted on bull gear shaft, oversize and arranged to protect the machine during coast down in the event of a power failure. 安装在大齿轮轴上的主油泵，超尺寸配置，以保护在突然停电时压缩机的充分润滑。
- The motor and pump shafts should have a coaxially. 电机轴和泵轴同轴度。
- Stop the running of one oil pump of the electric motor. 停止电机一油泵的运转。
- We are looking for supplier of oil pump PARTS brand name CTR. 我们需要求购汽车机油泵，请联系我们。
- The pressure of lube oil pump increases very slowly. 机油泵压力增长很慢。
- FSB series fluoroplastic alloy pump is composed of pump body, impeller, back cover, seal, support, pump shaft, bearing, coupling, fasten bolt, nut and base plate. FSB系列氟塑料合金泵由泵体、叶轮，后盖，密封性，支架，泵轴，轴承，连轴器，吊紧螺栓，螺母，底板组成。
- Stable operation: absolute concentricity of pump shaft and excellent static and dynamic balance of impeller ensure stable operation without vibration absolutely. 运行平稳：泵轴的绝对同心度及叶轮优异的动静平衡，保证平稳运行，绝无振动。
- The engine fan is usually mounted on the water pump shaft and is driven by the same belt that drives the pump and the generator. 发动机风扇通常安装在水泵轴上,由驱动水泵和发电机的同一条皮带驱动。
- Description: Zhejiang Pingchai Pumps Industry Co.,Ltd ---- Oil pump,tappet valve guide,push rod. ------机油泵、气门挺杆、气门推杆、气门导管。
- The fan is usually mounted on an extension of the water pump shaft and is driven by V-belt from a pulley mounted on the front end of the cramshaft. 风扇常常装在水泵轴的伸出物上，由安装在曲轴前段的滑轮上的v带驱动。
- Automatic oil pump and fault alarm syster, dygnosis and instructions. 自动注油,自动故障报警、诊断,指导处理。
