您要查找的是不是:
- oil seal gasket 油封垫
- Press the packing, replace the seal gasket. 压紧填料,更换密封垫。
- Remove and discard the front crankshaft oil seal. 拆下并抛弃曲轴前油封。
- GUANGZHOU ASIA SUPER OIL SEAL COMPANY. 广州市天河区东圃明兆油封机械经。
- The oil seal has the directivity, cannot install instead. 油封有方向性,不能装反。
- Slide-valve vacuum pump is a usual mechanical oil seal vacuum pump. 滑阀真空泵是一种常见的油封式机械真空泵。
- Exposed aluminum foil tape sealing gasket needed. 外露的垫片需用铝箔胶带密封。
- Live-loading automatically compensates for the transient loads which cause bonnet movement by maintaining a positive load on the pressure seal gasket as the pressure reduces. 动负载自动补偿波动转换中的变化,在压力减少时,阀帽会产生运动,维持压力密封垫圈上的正向负载。
- The hard sealing gasket also can absorb the noise and vibration. 密封垫圈也可吸收噪音及振动。
- Repair Kit Contains: 1-Flex Seal Gasket Seat, 1-Hinge Post, 2-Flapper Plates, 2-Flapper Covers, 1-Post Strip, 2-Seat Post O-Rings &Plastic Assembly Screws. 维修组件饱含:1件-柔性密封衬垫阀座,1件-铰柱,2件-阀瓣板,2件-阀瓣盖,1件-柱带,2件-阀座柱O形环和塑料总成螺丝。
- Changchun NOK-Freudenberg Oil Seals Co., Ltd. 长春恩福油封有限公司。
- Install the new upper rear bearing oil seal with the white paint facing towards the rear of the engine. 安装新的上后轴承油封,使白漆面向引擎后部。
- CAUTION: If the pressure seal gasket is not pulled up concentric to the body/bonnet top-bore axis, under lower pressure the gasket may not be properly seated.Consequently, leakage may occur. 警告:如果压力密封垫圈没有与阀体/阀帽顶部轴线处于同心为止,则垫圈在较低压力下可能不会适当固定,结果可能会产生泄漏。
- The primary function of sealing gasket is to prevent gas from leakage. 密封垫圈的主要作用是防止气体泄漏。
- At the same time, we can provide the high-quality oil seal, slewing bearings products. 同时,我司可以提供高品质的油封、回转支承产品。
- Use sealed gasket in the water path. There isn't stress on all link surface. 水道的连接应衬有密封垫片。所有连接面都不应有应力。
- The material of oil seal is advance, reasonable, and the processing of confect is preciseness. 因油封胶料配方先进、合理、配制过程严谨、拉伸强度变化率小,能适应各种恶劣的变化环境。
- IP65/NEMA 4 when properly installed using the sealing gasket supplied. IP65/NEMA 4时,正确安装使用的密封垫片供应。
- Design of mold and research of process for polyurethane elastomer for oil seal are introduced. 介绍聚氨酯弹性体油封的注射模具的设计及工艺研究。
- Linqing City Hongjiang Bearing Forging Co., Ltd., mainly engaged in: Bearing forging, oil seal ring, bearing business. 临清市洪江轴承锻造有限公司、主要经营:轴承锻件、油封环、轴承业务。