您要查找的是不是：
- oil pressure retention 油压保持性
- CONNECT AN OIL PRESSURE GAUGE IN ITS PLACE. 在这个位置连接油压计。
- Taiming Empty oil pressure Equipment Co., Ltd. 台铭空油压设备有限公司。
- Dammit! Oil pressure problems at a time like this! 见鬼！油压居然这时候出问题！
- The four-way valve releases oil pressure evenly to the pulleys. 四通阀对滑轮均匀的释放液压。
- Lengthen and change oil cycle, keep the oil pressure steady. 具有延长换油周期,保持油压稳定。
- The auto shutoff is for low oil pressure, and high temperature. 各压力、温度之保护装置齐备，故整个动力系统可自我侦测，自我保护而自动运转。
- Sends a signal from the oil pressure sending unit to the Powertrain Control Module (PCM) relating to engine oil pressure. 从燃料压力发送单元发送一个信号给动力传达系控制模组(PCM)，此信号与引擎燃油压有关。
- Add two accumulators when necessary so as to assure the stability and reliability of system's oil pressure and flow. 可根据需要增设两个蓄能器，从而更加保证系统油压及流量的稳定性和可靠性。
- The empty pallet dispenser supply pallets for final drums to stack by oil pressure system. 自动栈板供应机,依序输送栈板配合油压系统将充填完成桶自动堆放至栈板上达自动堆栈之功能。
- Pressure switch (optional) is installed in system to realize automatic transfer for pump under low oil pressure. 系统中设有压力开关(可选)，以实现在低限油压时的泵组自动切换。
- The machine adopts full oil pressure technology to achieve high pressure and firm jointing. 本机采用全油压设计，压力大，贴合牢固。
- In order to unify knowing and benefit manufacture,we must calculate the figure of the oil pressure contacting brake. 通过理论计算确定贴闸皮油压的数值,以便统一认识、指导实践。
- Impact of inflation pressure retention on tire aging and durability 充气压力保持率对轮胎老化和耐久性能的影响
- For piston compressors, centrifuges also have a corresponding low oil pressure protection device. 对于活塞式压缩机、离心机也有相应的油压过低保护装置。
- Uses the visualization plunger type test equipment on the oil pressure test experiment of the sunflower seeds. 摘要采用可视化柱塞式试验装置，对葵花籽进行出油压力测试试验。
- If there is not enough oil pressure, the machine will warnimg, and oilway as I have said above to be checked. 如果油压不敷，则板滞会自不静报警，按前述不差油路举行查抄。
- The start system interfaces with the sequencing oil pressure switch, speed switch, APU control unit and APU switch. 起动系统连接着程序化的滑油压力开关、速度开关、APU控制组件及APU开关。
- The two pulley widths, adjusted by oil pressure, react to the position of throttle, speed, and other conditions. 两个滑轮的宽度通过液压来调节，以便作用于抱扎的位置、速度和其它条件。
- Oil pressure transmission is employed for the workbench, with automatic positioning, high efficiency, and accurate aperture processing. 工作台采用油压输送,自动定位。效率高,孔距加工精确。
